2008年8月20日 · Just one thing using the input as a talkaround really can't work, using the outpt in simplex form can. If you transmit on the input you will come through the repeater, if the repeater had a coded squelch and you transmit without it at worst you can jam the repeater at best you cause interference on the channel, the proverbial "double".

2024年12月7日 · At Input Frequency/TGID enter the frequency or ID and press E/yes. See also Edit Frequency or ID To Edit an Existing Channel scroll to the Channel and press E/yes .

2017年6月6日 · I am beginning to use the CHIRP software and am confused by the "memories" entries ... I am trying to input this repeater spec: TX 467.5000, RX 462.5000, PL TX 127.3, PL RX None (which makes perfect sense to me ...) However, in the CHIRP "memories" interface, there is only a single entry...

2012年9月11日 · If there are two different frequencies listed, the agency mobiles listen to the frequency listed in the first column but transmit on the second, different INPUT frequency (duplex operation) into the agency's repeater. The repeater then repeats everything it hears coming in on the INPUT frequency back out on the first main frequency. This allows ...

2005年12月7日 · Frequency Input License Type Tone Description Mode 453.67500 WPUW289 BM 192.8 PL Fire Dispatch FM 453.80000 WPNR843 M 192.8 PL Fireground FM 857.71250 812.71250 WNNM224 RM 118.8 PL Police FM Elkhorn, City of [] Frequency Input License Type Tone Description Mode 154.44500 WNVZ580 RM 146.2 PL Fire FM

2016年4月3日 · I'm trying to program a Baofeng radio to match existing (commercial) radios, using CHIRP. But I don't understand what all the "tone" columns in CHIRP mean. Tone Mode, Tone, Tone Sql, DTCS Code, DTCS Rx Code, Cross Mode.... I know generally that's setting different tone codes, but all I have to...

2013年6月7日 · Guide to programming repeaters into a Baofeng UV-5R I see a good bit of threads about how to program repeaters and so on.. Lets start.. 1. Power on your Baofeng 2. Hit the VFO/Memory button to enter "frequency mode"(VFO) 3. Hit the menu button, enter the number 7. You will want to hit Menu...

2018年11月22日 · PROBLEM SOLVED! The DSD+ plugin saved my day. Looks like my "Input & Output" settings were not correct. And now I am able to copy the digital signals identified as DMR (DCC 6). Now trying to understand the log messages seen on the DSD+ command window and on the DSD+ Event log window.

2024年12月12日 · You can also try to lower the SWR by adjusting the antenna length and or matching network. If none of this works a SWR measurement is scalar without the phase angle you can't determine the antenna input impedance vs frequency to understand the problem. When using an amplifier, the amplifier input impedance is 50 ohms for a low SWR.

2016年1月4日 · Sounds like you're trying to add conventional channels. There may be a shortcut, but I know this works: Menu -> Manage Favorites -> Choose Favorites list -> Review/Edit System -> Choose system (must be a conventional system) -> Edit Department -> Choose Dept -> Edit Channel -> New Channel -> input frequency, including the decimal point.