Cisco UCS 5108 Blade Server Chassis OVERVIEW 3 OVERVIEW The UCS 5108 chassis is a 6RU chassis the that can accommodate up to 8 half-width blades or 4 full-width blades, or any combination that will fit in the chassis. The chassis has two I/O bays for Fabric Extenders such as the UCS 2208XP or Fabric Interconnects such as the UCS 6324.

Cisco announces the end-of-sale and end-of life dates for the Cisco UCS N20-6508 5108 Blade Server AC Power Supply. The last day to order the affected product(s) is December 30, 2015. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin.

2020年6月5日 · Another question - Does anyone have a working link to the release notes for UCS B-Series Blade Server Software Release Note for 3.2(3n)? The link for this at the support page is broken. 0 Helpful

2024年8月5日 · This appears to be for the UCSB-5108-AC2 Chassis with UCS-IOM-2208. I know the end of sale for the UCSB-5108-AC2 Chassis with UCS-IOM-2408 was not December 5, 2020 because we ordered them in December 2023 and received delivery in January 2024.

2020年7月27日 · That same doc has section: Manage Firmware through Cisco UCS Manager. The Infrastructure (UCSM / Fabric Interconnects / IOMs) firmware upgrade can be done with the environment online, but "problems may happen" so should be done during a …

2021年5月4日 · The first generation UCS chassis (N20-C6508) was updated (UCSB-5108-AC2) to include backplane traces to allow UCS-mini. The first generation UCS chassis stopped being SOLD, hence the EoL announcement you found. The first generation UCS chassis is still a perfectly valid/usable/supported chassis.

2013年4月10日 · The Cisco UCS 5108 Blade Server Chassis is powered by 208 V (220 V outside the US) 50-60 Hz AC. Up to four power supply units (PSUs) may be installed, each with a single C20 connector for input power connection to the UCS 5108 power supply.

2016年6月15日 · It sounds like you have a UCS Mini (6324), with 4 10Gb ports (each FI/IOM) along with with 40Gb QSFP port that can provide network uplink connectivity,,, or if configured as a server port, could be used to connect to a compatible Cisco UCS rack server, or connect to one additional 5108 Chassis with 2204XP IOMs.

The Cisco UCS 5108 Blade Server Chassis is powered by 208 V (220 V outside the US) 50-60 Hz AC. Up to four power supply units (PSUs) may be installed, each with a single C20 connector for input power connection to the UCS 5108 power supply. This document applies to all versions of the Cisco Unified Computing System Manager.

2012年10月12日 · Problem description: Sometime our UCS Chassis 5108 and both IOM are suddenly INACCESSIBLE. This happens frequently (Happend 5 times in just a month) Temporary Solution: To unplug and re-plug Chassis power cords twice, then the Chassis back to normal. Once the Chassis is inaccessible state, below are what we witness on the Chassis: