2022年7月9日 · Is this to some how make up for the difference between Holley's recommended 34% and the 52% that the engine will need with E85? At the end of the day I can pop Holley's numbers in and I'm sure it will run great.

2024年12月5日 · I have a turbo 5.3L LS running Terminator X on 93 octane pump gas. It's been running great for over two years. I want to convert my fuel system to E85. What's the procedure within the Terminator X as far as Base Fuel Table, Target AFR table, and setting up any fueling offset tables, to convert my setup to E85? I won't be

2021年6月15日 · Flex Fuel Sensor I am using - https://www.summitracing.com/parts/ado-13507128?seid=srese1&gclid=CjwKCAjwn6GGBhADEiwAruUcKijIjApM2iGAi3PdxZgk0jh66d_9Gyu8J4xJf...

2013年7月17日 · Change target AFR and your fuel mao will Change. Start out with a Little more CL / Learn and be nice to it. For Cold starts i usually add up to 400% more fuel but subracts it almost imediatly. E85 fires on the pump fuel in it when its Cold.

2024年5月2日 · In todays video I take you through the easiest way i found to run e85 in my turbo ls mustang using a holley terminator x max. There are multiple tables and options you can use for running...

2019年12月30日 · I'm getting everything squared away with my pump gas tune on my 5.3L LS turbo swap with my Terminator X, but I also have a flex fuel sensor and I'd like to run E85 as well. I've seen some Sloppy Mechanics tables, etc., on running E85, but I'm looking for more detailed info and suggestions?

2023年2月15日 · To generalize I’d see what I consider risky charge temps around 15-20lbs. (on both my twin turbo setups. Around 15lbs you double the factory motors power. I’d see 200+ish degrees at those levels. (on both cars). I consider that "safe" on e85. Around 20lbs I’d bury the 255* charge temps sensor before the 1/8th.

2021年11月10日 · New to tuning and trying to get a solid E85 base tune on my terminator x for my turbo Foxbody. Can anybody help? in this thread in this sub-forum in the entire site

2024年10月5日 · This year the engine is running ~7.5 and the only thing I changed is incorporated timing control into the Terminator X. It was difficult to set at the track, but think the timing was at 36 instead of it's usual 39.

2023年2月18日 · I went with a Holley Terminator X computer and also added larger injectors (Bosch 220). I already had a set of triple 465 intank pumps with #10 feed and #6 return lines (PTFE) along with a stainless steel filter (recommended for Ethanol).