2024年10月8日 · That's a distributor off a TD6- 61 series which began production in 1956. 353898R11 according to the book. Thsts interesting because the guy i purchased it from said it was a td6 61 which is the same as the manuals that came with it... there was some other number I pulled that said it was older.

2024年11月14日 · Members; 810 Gender: Male Location: SE Ontario Interests: Current fleet: 1951 TD9, (2)-1956 TD9-91's, 1959 IH BCF-180 Tandem, 1970 Timberjack 230 skidder, 1943 Chev CMP Army Truck.

2024年7月4日 · TD6, it looks like your clutch is disengaged, engage the clutch (push the throw-out bearing in towards the flywheel) also on the end of the input shaft (27) there is a zerk fitting, take that out, it will give you another 1/2 inch clearance. This should give you enough room to remove the coupling and then the clutch will come out.

2019年7月22日 · I recently acquired my second td6 crawler with an IH blade. I need to pull the engine to flip or replace the ring gear before I can try to start her up. The manual talks about putting a wood beam across the front end and jacking it up to take tension off the springs and to give the engine clearance to come out.

2024年9月26日 · Does the TD6 have an engine blowby. I am seeing some exhaust not making it's way up through the exhaust pipe and it appears some of it anyways is exiting under the tractor I'm assuming via a blowby valve? This was the first start of the year. I also appear to have a rear engine leak seal issue I will need to address.

2024年5月28日 · Hooked up a battery to my 1949 TD6 for the first time yesterday and attempted to turn it over under power, however the starter spins without the bendix kicking out and engaging the ring gear. Couple of things worth noting: Tractor was stuck/not running when I got it. The machine previously had tw...

2018年8月2日 · Hi All, I have been following this forum for quite some time now (it has been extremely helpful!) as I work on my 1950ish td6 crawler. I have finally become a member so I figured I would share my experience in case it will be of help to anyone else. This crawler was purchased by my great grandpa ...

2013年12月25日 · Hi everyone, I'm new here and me and my dad just picked up a td6 a few months ago. serial number Tdbk 5058. Me and my dad are having a real hard time getting it to run on diesel. When switched over to diesel it just dies. Gauge shows some pressure but not full. Thinking something with the pump. A...

2007年2月19日 · Wondering if anyone had an injector pump for a TD6 62 that they weren't using. I'm looking for one to buy in order to get a TD-6 back up and running again. Thanks for the help Oh and any help and advice for fixing a left clutch on a TD6 would also be appreciated.

2005年9月29日 · Working on my recently purchased 1954 TD6 crawler with dozer blade.I have both the primary and secondary fuel filters apart.Local NAPA store sold me a 3147 for the primary and a 3148 for the secondary.Are these the correct numbers?Something seems to be missing out of the primary housing.It has an adapter disk on the bottom of the filter ...