2018年10月23日 · 3600 trouble free miles up until now. Started out with the machine stalling out when coming to a stop. I had an idea the one way bearing in the wet clutch was toast because engine braking wasnt working like it used to. Changed out the one way. Was still stalling coming to a stop after changing...

2015年12月10日 · As for the stalling issue, Yamaha says; "This is common during the break in period even up to 20 hours. The engine is tight and the units may occasionally stall till the engine frees up a little.

2017年6月19日 · Wolverine will stall out after coming to a stop and getting back on the gas then will restart right away. Anyone else with this?

2021年9月27日 · Anyone else have a stalling issue after refueling, it does go away after awhile.

2018年3月11日 · Started out with the machine stalling out when coming to a stop. I had an idea the one way bearing in the wet clutch was toast because engine braking wasnt working like it used to.

2015年6月25日 · 2016 EPS SE stated stalling on my first ride after 20 hour service. Rode for Three hours no problem stopped for gas and it started stalling about twenty minutes after that. While towing out of woods was able to re-start and got it back to camp. I blamed the fuel so drained and added fresh and also new spark plug.

2020年7月3日 · I had similar symptoms....stalling and then surging when it would run at idle. Coming off idle was blubbery, but mid to WOT was fine. Check Engine Light was on intermittently. Turns out after much parts swap at dealer, it was the barometric pressure sensor. This was only at 500 miles and still under warranty.

2023年11月7日 · My 2022 RMAX2 XTR has been stalling lately, it starts and idles fine, but it doesn't seem to matter if its warmed up or not when you come to a stop it often stalls if you come to a quick stop. If when you stop you give just a little throttle as the engine idles down it will idle fine. It seems like it just with the initial deceleration that it stumbles. Has anybody else come …

2021年9月4日 · So the problem started with the engine starting than immediately stalling upon cold starts about two months ago. Didn’t think much of it since I really don’t use the machine as much as I want and thought it was just the nature of the beast. My machine would run, but very very rough, the...

2021年8月11日 · When starting you have to give it throttle and once running it purrs like a kitty until you get on it if you try to give full throttle it bogs and wants to stall I’ve replaced the plugs and checked all air box connections and the filter is clean is anyone els having issues like this