2008年11月12日 · @918476:New Saito 1.25 @918477:Saito 1.20S @918478:Saito .91S!!Saito 1.25 and .91 Size Comparisons I had my .91 close by, so set it up on the bench next to the 1.25. The 1.25 is much closer in size with the .91S than the 1.20S it is designed to replace. @918479: Saito 1.25 on the left. Saito .91 on the right. @918480:Front View @918481:Top View

2010年12月12日 · Saito 125 will spin one 9000-9500rpm depend on 0-30% nitro. Remember, any small advantage the DLE may have in thrust will be more than thrown out the window due to higher running weight. The Saito will be quieter on the standard muffler also.

2008年6月20日 · The saito can have a blockage at the fuel nipple prior to the spray bar. I fought a problem for 6 month before finding a very small particle in the fuel nipple. If your valves are set .001 to .003, OS F plug,, good fuel,, I use cool power …

2023年10月25日 · Here is my 125-a turning a MA 14 x 7 (3) blade @, Saito 125-a MA 14 x 7 3-B 10% 9,330 1,818 Wildcat 2/4 fuel with 18% full synthetic, 10% nitromethane, CHI set at 34 degrees btdc. Copied and pasted from my notes.

2025年3月23日 · NIP Saito Muffler SAI125a74 & curved Header for Saito 125: pingwersen1: Fuel Engines and Accessories (FS/W) 0: Jun 18, 2024 03:00 PM: Found: Saito 125 Cylinder or Damaged Saito 125 for Parts: rle9599: Fuel Engines and Accessories (FS/W) 7: Sep 26, 2023 07:30 PM: For Sale: Saito 125.....$125.00 shipped: pault: Fuel Engines and Accessories (FS/W ...

2009年8月9日 · I've a friend with two UCD 60's. One has a OS 120AX and the other a Saito 125. They both have APC 17 X 4W props. They have the same performance best I can tell but the Saito runs much more reliably. Unless everything is just right, the OS is prone to quit on you.

2018年1月17日 · Last year I reported a conversion of a Saito 125a to gas and this serves as a follow up report. The engine fitted into a 90" Cub has now logged 48 flights for eight hours of flight time. Fuel cost for that eight hours remains less than ten dollars whereas had the engine remained on glow, fuel cost would be ten times that.

2015年7月31日 · I have a Saito 125 engine and I was recently cleaning the carb. When I removed the HS needle from the carb I found something that looked like o-ring, but I am not sure. The material was found in small pieces just inside the tube that the needle slides (see attached photo).

2022年2月22日 · The FA-125 uses cylinder screw set part# SAI6514, which comes with the cyl jug and the rocker cover screws. I just measures and they are 2.5x0.45x16 mm. If you want 2.6 mm, then head over to McMaster Carr.

2010年7月29日 · Hello I have a saito 125 with less then a half of a gallon threw it and it runs like a top. But the tiny tip on top of the push rod fell out of the little cup it goes in on the adj screw on the rocker arm?? I check it with a feeler and it right on. But when you push down on …