2011年12月12日 · Congrats on the sks! Pop the lever infront of the trigger guard back, allowing your mag to pop open. This will allow your bolt to close. or carefully push the mag follower down 1/2inch+ WHILE HOLDING THE BOLT BACK AS TO NOT SMASH YOUR FINGER I prefer the first for safety. If this does not solve your problem, we will need more info/pics.

2008年8月31日 · Re: sks bolt lock, won't chamber « Reply #13 on: September 03, 2008, 05:59:47 AM » Norinco is Chinese, probably the most common and probably the best to start with.

2015年7月6日 · Re: SKS bolt modification « Reply #9 on: July 06, 2015, 07:37:24 PM » I was implying that the fire from a blown primer melting a spring is minor compared to blowing a pin out the back of the bolt, damaging the retainer, or in at least one case cracking the bolt.

2014年9月27日 · Here's my first SKS bolt modification. Did it in the garage in about 25 minutes with the Dremel and a small "peach" colored grinding stone. It's the 932 - just looked it up. I took the bolt and slid it into a Tapco mag and marked just where the feed lips would clear if the metal "lip" was removed from the bolt. I used a vise to secure the bolt.

Soak the bolt in the pentrating oil, and let it sit overnight. I mostly use the PB Blaster for this because it is cheap, and it works really well for this kind of thing. You will also need a sturdy drift or punch, a ball peen, drilling, or small sledge hammer, somewhere in the 1lb to 2 1/2 lb range, a small hobby or gunsmith mallet (for tapping ...

2008年12月16日 · 1. Hold the SKS bolt assembly in place, and 2. Hold the socket and torx bit punch in place, AND 3. Operate the press lever. However, once you manage to accomplish those gymnastics, the firing pin retainer pin should push out with amazingly little effort. At least mine did. Yeah, the length of a typical torx bit isn't nearly long enough to push the

2011年7月26日 · Re: SKS bolt carrier keeps jamming forward while shooting « Reply #7 on: July 21, 2011, 08:46:44 PM » Use a brass 410 shotgun brush for the chamber....you will also need the two dollar thread adaptor cuz the shotgun brushes are a dif size threads.

2014年9月27日 · I would not leave the bolt open. However, I think it is nice to be able to have the SKS at the ready without being in condition 1. With the bolt closed on an empty chamber it should be perfectly safe. Pulling the charging handle ( bolt) back and releasing would chamber a round. Sort of like the Israeli method with semi automatic pistols.

2008年9月14日 · The SKS has a bolt hold open feature which will work with the factory or Tapco mag. The "Type 84" style of detachable mag SKS had an additional manual BHO added because the standard setup will not function with the AK style mag. The Tapco mag is a very differnent piece than an AK style mag

2007年12月31日 · Im new to the SKS's so I have no idea on how to date them or anything. It also has the spike bayonet. The Bolt carrier and bolt itself are in great condition with no rust or anything and has a good finish to it, just not the almost …