2024年9月19日 · I have an HP 2920. It appears it has grabbed the same IP as the Meraki firewall, so traffic is not flowing properly. I’ve done hard resets on all equipment, cable changes, and about 3 months worth of other experiments. I have concluded that I need to assign or configure the HP to have a different IP. It is quite remote, so a local non-IT resource is assisting. Right now, the CONSOLE cable is ...

2013年7月16日 · Howdy, folks. I’m trying to spec out a new 48 port switch for our brand spanking new secondary server room. The switch needs to provide POE to all 48 ports, support 10/100/1000 Ethernet, and have a 10GBASE-T uplink for connecting to our primary server room. I thought I had found what we needed in the HP 2920-48G-PoE+ Switch (J9729A), until it was pointed out to me (rather embarrassingly ...

2024年8月14日 · Hi all, I want to stack my 3 Aruba 2920 switches in a Ring topology, but it’s stuck in Chain. Here is my stacking cable diagram : show run Running configuration: ; hpStack_WB Configuration Editor; Created on release #WB.16.05.0007 ; Ver #12:08.15.9b.3f.b3.b8.ee.34.79.3c.29.eb.9f.fc.f3.ff.37.ef:4a stacking name "Management" member 1 priority 255 member 2 type "J9729A" mac-address 5820b1 ...

2016年8月20日 · Never worked with an HP Aruba switch before, not familiar with its CLI, trying to setup multiple vlans to send traffic to our Sonicwall gateway. I believe static routes need to be configured. any links to tutorials or command line steps welcome. current config: module 1 type j9726a ip default-gateway 192.168.2.1 oobm ip address dhcp-bootp exit vlan 1 name “DEFAULT_VLAN” no untagged 2-4 ...

2021年9月26日 · I picked up an HP 2530-48g J9772A switch for my home lab that I am trying to reset, but the instructions provided by HP don’t seem to be working: 1. Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch. The power and fault lights come on. 2. Continue to press the Clear button while releasing the Reset button. 3. When the Self Test LED begins ...

2022年4月19日 · Can anyone speak to likely success or failure in trying to update “HP J9726A 2920-24G” switches directly to the latest available firmware? A very long time ago, HPE/Aruba support advised stepping through every version. Among the problems are that I don’t have a fall back plan that would take me back to the current version since it is so old and what was shipped.

2014年6月9日 · hi guys just picking up on this old thread, as , no doubt your aware im having an issue. I have a 2610 j9087a version r11.15 (yes its old, been reset) and wish to upgrade to latest firmware, r11.122, however it will not accept the uploads- straight to the latest - then went back and done individual files from the next upgrade (54)through the gui.

2011年8月16日 · Hello SpiceWorks Community! I’m new to the forum, sorry if I make any mistakes. I had my datacenter engineer install a new HP ProCurve J9279A but I cannot access it via web/telnet. It’s asking for a username/password and I wasn’t given anything by my engineer. Is there a default password for this switch or does it have to be set first? Thank you for your help!

2014年1月8日 · Solved: plugging into a non console port. simple problems simple person. Thanks for the advice.

2015年7月20日 · Hi everyone, Very useful info, HOWEVER: I found a solution that differs to the above, when using TFTP to get the config onto the switch.