Software Defined Radio technology solutions for a wide range of military operations and platforms on the land, in the air, and at sea. Herrick Technology Labs develops and manufactures complete turn-key system packages with high performance, low SWaP, and ease of interoperability.

HTL offers a variety of firmware/software based applications for its transceiver products and systems as well as a software developers kit (SDK) and board support package (BSP). Contact HTL for details.

The HTL DF3 is the third generation HW man portable DF antenna with a broad frequency range and small size. It is designed to work with the HTL series of transceivers including the HTLx-U, HTLx-T2, HTLx2, HTLw-U and the HPack system. Request Spec Sheet

2023年1月18日 · HTL’s UWB SDR module and 19-slot chassis capability is based on the HTLv-43 (RF converter) and HTLv-53 (digitizer + FPGA) which provides a total of 4 GHz of full-duplex simultaneous capability with a frequency range of 20 MHz to 20 GHz.

2019年3月30日 · mstar（mtk）芯片，noos类：182，v56，V53等，android类：648,358,9255。。。。往后更新，此类芯片公版常见问题及添加常见功能的解决办法开发，技术支持

2014年9月26日 · I have had my cable card for over 8 years and every once in awhile, my S3 would lock up the picture and then reboot. I then purchased an XL4 and about once every couple of weeks, it would get a V53 error on screen, lock up, and then reboot.

HTL Encoder Card for use with Yaskawa A1000 GA700 and U1000 Inverter Drives. Input Frequency: 50kHz Maximum. Suitable Encoders: Complementary, Open-collector Single track (A pulse), 2 track (A, B pulse) or 3 track (A, B, Z pulse). Level: H level: 8 to 12 V, L level: 2.0 V maximum. Line driver: None. Output voltage for encoder power supply: 12 V ...

2018年9月6日 · The battery supplied with the V53 processor board is dead and need replacement. Resolution. The battery supplied with the V53 processor card and 532 controllers is rated at 70mAh. Specification V53-BAT provides a battery rated at 150mAH. The circuitry on both the V53 processor card and 532 controllers can handle this higher rated battery.

2024年12月24日 · Tuner: V53. TV Format: Analog Signal. colour: As shown. Programming: 1. Copy firmware of "VST53C_4MB_M. bin" in formatted U-disk(FAT32), then insert U-disk and 7KEY-Button to driver board. Screen interface: LVDS Single 6 / 8, Double 6 / 8.

2017年11月17日 · I went to my Tivo Bolt, which is running Hydra, and pulled up channel 9-1 and it was showing up fine until I did a channel strength scan. Once I did that, channels 9-1 and 9-2 both disappeared and I got the V53 error code. Channel 9-3 was still coming up, but with the programming for channel 9-1. Weird, right?