This is a list of vehicles designed or produced by GAZ, a Russian carmaker based in Nizhny Novgorod. GAZ-12A - ″ZIM″ Taxi (???) GAZ-46 MAV - light 4x4 amphibian (1952-??)

gaz-33还有一种自卸车版本的，命名为gaz-33a，它把底盘后方缩短了230毫米，之后装上了zil-mmz-555的卸车机构。 现在GAZ-33到底生产了几台还是个问题，根据现存的档案照片，我们认为至少在1965～1967年造了4台，还有3台自卸车是在1967～1968年制造的。

GAZ-3307 and GAZ-3309 (nicknamed GAZon) are Russian trucks produced by the Gorky Automobile Plant. The GAZ-3307 was announced in late 1989, and the GAZ-3309 was announced at the end of 1994. Under the designation GAZ-3309, there is a variant of the vehicle with an extended wheelbase and modified engine.

It was equipped with a 140 hp GAZ-41 V8 engine borrowed from a wheeled armored vehicle BRDM-2. Basic units were taken from GAZ-53 truck, which got an extended bonnet and new fenders, as well as an elongated wooden flatbed platform. Factory tests finished in 1966, but another two factories had already started mass production of such vehicles ...

初代gaz-63在增设一轴后获得了初代gaz-33，历史上gaz-33的测试效果不佳，因此本位面没有采用，改为使用zis-36作为苏军战前最大规模的通用三轴卡车。 lb-62 中型卡车. zis-5（amo-3）

2022年12月18日 · gaz-33：全驱三轴卡车，载重量2.5~3吨，在gaz-63的基础上研发，是1946年试制的试验车型。但是没有量产（因为gaz-51发动机动力不足），这种车型的研发为后来的zis-151积累了经验

2022年12月13日 · 苏联高尔基汽车厂（gaz）制造的两轴车比较出名，从轿车中的“伏尔加”到卡车中的gaz-51等车型。 但是很多人应该不知道高尔基汽车厂曾经也生产过三轴车，今天就给大家介绍一下GAZ-33，这是一种由高尔基汽车厂生产3轴原型车。

2023年2月15日 · 结果是一辆具有 6x4 车轮配方且承载能力为 7 吨的汽车。 它被称为 gaz-33。 高尔基工厂希望尽快将该模型投入批量生产。 于是，7辆实验车很快就准备好了。 到 1968 年，他们已经通过了所有工厂和国家测试。 gaz-33 没有收到任何严重的投诉，因此被推荐进行量产。

The GAZ-33 was a truck produced from 1941 to 1946. The truck's design directly previewed that of the GAZ-53, the vehicle replaced the aging GAZ-AAA which was produced alongside the GAZ-33 until 1946, when the GAZ-33 stopped getting produced due to very low sales, due to these occurrences it is considered a concept vehicle by fans.

The GAZ-3308 "Sadko" (Russian: Садко) is a Russian-built, 2.5-ton, 4-wheel-drive cargo truck. The Sadko is produced by the Gorky Automobile Plant (GAZ). It is named after Sadko, a protagonist in many bylinas of the Novgorod cycle. Sadko has been replaced in production by the Sadko Next (Ru:САДКО NEXT). [1]