2024年10月3日 · FLEXCAN_DRV_ConfigRxMb(INST_FLEXCANC, 6, &FlexCAN_receiveMsgInfo_ext, 0x210); i used global mask to accept to receive all the canids …

• Make sure FlexCAN module is disbled (after reset, it is disabled) • Select clock source for FlexCAN by setting/clearing CTRL1[CLK_SRC] bit Step2 • Enable FlexCAN module by …

2024年12月5日 · For the IRQs, you can see them declared in the FlexCAN_Ip_IRQ.c file: And finally, for the FlexCAN MB, each individual message buffer is 16, 24, 40, or 72 bytes, …

2022年2月7日 · the FlexCAN_Ip_Example_S32K344 do simple transmit/receive testing in loopback mode. NOt sure if thee is anything with freeRTOS too. Generally, if you do not want …

2025年2月10日 · Solved: Hi all， I am debugging the CAN communication function, but I cannot find the flexCAN device node in the dtb file.

2024年11月28日 · To ensure successful CAN communication on your S32K3X4 EVB-Q172, correctly configure the protocol clock and bitrate, initialize the FLEXCAN driver, set up …

Example S32K344 FlexCAN_Ip TX/RX/EnhanceRXFIFO DMA test S32DS3.5 RTD400 The purpose of this demo application is to show you the usage of the FlexCAN module configured …

2024年12月9日 · When it comes to FlexCAN interrupts, the FlexCAN0_0 contains 9 general interrupt requests, while the FlexCAN0_1 – FlexCAN0_3 instances contain 96 message buffer …

2024年12月11日 · I am using S32DS 3.6 AND RTD 5.0.0, to avoid conflict with project Example S32K344 FlexCAN_Ip TX/RX/EnhanceRXFIFO test S32DS3.4 RTD200 - NXP Community …

2025年3月13日 · this project is from FreeRTOS sample code and have modified FlexCAN clock source from 24Mhze(FIRC_CLK) to 30Mhz(AIPS_PLAT_CLK). currently, I can't adjust …