2014年5月16日 · And filling up the Freejet 330TX's ink lines with Firebird's new Holy-grail type goodness gave me chills... Having said that, here is our personal experience with the results we've received with Firebird Ink's White Ink. Experience level: I have been dabbling in the DTG world almost 3 years. I didnt get serious until about 1.5 years ago.

2017年7月29日 · 1. Ink starvation: This is when you get missing nozzles after a few prints. Caused by restricted lines, filters, or pumps. 2. Air bubbles: Usually Dumpers or cartridges not sealing well, but could be other issues as well. 3. Ink channel clogs: Dried ink inside the printhead. Common print head issues (non-recoverable): 1. Ruptured ink channels:

2015年4月29日 · The ink still does separate like any other DTG ink and requires some cleanings or print outs to get it out of the lines if it sits for longer than a day or two, but I have been told it will not cause the gunky damper issues that other ink separation can.

2008年1月25日 · Was wondering if anyone has had any experience with removing fresh ink off a shirt before pressing. What I mean is when i took it off the platen the sleeve landed on my print putting ink on the sleeve. I was told and can't remember how, but was told to remove before pressing. I tried some windex which removed the ink and left me a blue spot.

2011年2月16日 · Black shirt with white ink pretreat and cmyk $3.50 per shirt more or less. But this is a wag. All American Atlanta Branch,Epson F2000, NeoFlex DTG, Sales Demo and Training in Atlanta Ga .

2008年6月22日 · I have used a product called "thriller" and a toothbrush. But even a bleach pen hasnt worked on getting ink out that hasnt been heat set. You have to be careful, the toothbrush, or even the rubbing together because you are creating alot of friction in that spot, and you will likely get a wear spot, or fuzzballs.

2010年7月18日 · Eco-Solvent ink can be printed on coated and uncoated media, the main issue with this ink formulation is that the ink needs to be heat set to cure instantly, otherwise it will bleed. Also the material that needs to be printed has to be preheated to 42-50 degrees Celsius.

2010年1月8日 · just curious if anyone has tried refilling their inkjet cartridges with garment ink and printing. I print on canvas as well and was curious how the garment ink would react. I am currently using a HP Deskjet 9800 with two cartridges HP 95 and HP 96 modified to refill. Just curious here.

2013年7月24日 · Thanks man. I don't use ekrip anymore. I had issues if the design was a3 size. I use acrorip 8 now. I got told that you should print with ink limits set to around 35% but when I did the print was really bad. Really faded and the colours bled. So I've had no choice but to go higher. To get a decent print I have to use 80%.

2025年2月19日 · DIY DTG Epson 3880+ AcroRip + Firebird ink = how setup it's all? androffka; Aug 6, 2016; 18 11K Nov 20 ...