Please run DMR AutoCal, or manually adjust the RX offset on the Modem page in +-100Hz steps from -500Hz to +500Hz for the lowest BER. You can verify settings using the openSPOT's built-in local echo service on DMR ID 9999. If AutoCal does not work for you then the RX offset between the transceiver and the openSPOT is greater than 500Hz.

It does not matter if you call this with a private or group call, however, the BM parrot on DMR ID 9990 only works with a private call, and some servers use different DMR IDs for the parrot service. You should set the TX contact to the talkgroup you want to talk on.

Hi I am trying to set up an openspot2 on Brandmeister DMR. I have an Openspot 1 works great. This one will transmit to Brandmeister. I can see my information in the Dashboard on the Status page. I can't receive anything. The RX and TX frequencies …

So, I got an openSPOT2 to use DMR from home. What is the best way to configure my openSPOT2 for DMR-MARC network? Currently using DMR dongle connector, but I must be doing something wrong … I can see messages going out and I can use openSpot 2 Parrot, but no traffic heard and no contacts … Thank you, N2IPE.

2024年12月10日 · I connected to Brandmeister Parrot, it hears me fine, as per the last heard page, but cannot hear it. I am able to do all the Dstar functions between my radio and the open spot, Time, Inquiry, ect. So my radio is setup correctly. Spent 4 hours trying numerous servers and talk groups.

For all Anytone 878s I have the parrot TG9990 works perfect, but for my two Motorola SL1M the parrot can not talk back after I key up the parrot, on the OP dashboard the Tx shows up but no signal comes back. I wonder what issues/setup of OP3 is related to this, or it is a network issue? Thanks for input. Kim BX2AEK

I do not get anything back on local echo or Parrot 9999 or 9990. I have tried all color codes thinking it was the squelch and no luck. Attached is a screen shot of the OpenSpot & MD380 Settings.

Hi .I sometimes use the openspot with my yaesu ft1xd with excellent results at crossmode (fusion to dmr).I also have a friend with a yaesu ftm-100 (fusion-c4fm) to my neighborhood and i want to give him access to dmr network.He setup his radio with his callsighn and when he press the ptt my callsighn shows at dmr network not his.I read the manual for how can i set my openspot at the …

2016年7月29日 · You can use FCS 99 parrot by connecting to FCS room 99, and talking on your DMR radio (don't forget to set your modem to DMR/Hotspot for cross-mode operation). ApipApip Thanks Norbert

If you are using a C4FM radio, you can modify the default DMR ID and call type for cross-mode C4FM calls dynamically by sending a DTMF code in the format *4004 for a private call to ID 4004, and #204 for a group call to ID 204.