2016年5月15日 · Hello guys! I have this quite complex “building” here. In the middle, where the gap is, i want to build a ramp that starts from the bottom in the front of the building, to the top in the back of the building… My approach was to take the edges from that gap, and drape them as a line onto a inclined, flat surface. I then used the follow me …

2020年4月8日 · hello, can you help me guys, i wanted to make a ramp it is a mixture of straight and curved ramp but i cant do it, it should have a top height of 3m and base height of 0 m thank you DaveR April 8, 2020, 2:36pm

2017年7月31日 · I’m trying to make a mixture of curved and straight parking ramp…the starting level is 0m and the end level is 5m. I’ve tried follow me, intersecting planes and now I’m doing the tedious job of marking levels on each possible arc vertices. Please …

2024年4月1日 · Hello, I want to make a curved ramp with a flat landing in the middle and the end. I already know how to make the curved ramp using Curvishear and Curviloft extension. But the problem is, the transition from the ramp and the landing is too sharp. Is there any extension or native tools that can make the transition smoother? I already facing this problem several times, and one time I finally can ...

2015年1月31日 · I need to develop a ramp (pathway with a small planting space between the wall and the pathway. The planting area is 2 ft wide, and the pathway is 4 ft wide. I took my arc tool, and found endpoint at the bottom and the top, and than with a lot of pain, my curved turned a cyan color, which I am hoping indicates that the curve is touching the ...

2018年4月22日 · Download “Curve Maker” from the Extension Warehouse. It puts a helix command under draw > curve maker > helix. First click - drag - click to make a helix of any size, then fill in the parameters in the measurements box. It’ll change the helix you just made every time you change a parameter and press enter.

2020年3月21日 · The ramp starts on the wall’s opening and follows longitudinally along the house. I’ve started by providing a small amount of information, so I wouldn’t bias your solution. This is the basic drawing so far (see image below). Please note …

2023年9月7日 · As pictured here I am trying to model a ramp for my design class, I used the 2 point arc tool to create the curved ramp but I can’t figure out how to create a surface for it. Any help appreciated francisquitof September 7, 2023, 1:51am

2022年11月11日 · I drew edges on the top and side to connect the curve with the top back edge of the apron. Screenshot - 11_11_2022 , 1_59_12 PM 1303×569 14.7 KB I erased the top front edge and the one at the centerline of the apron, selected the edges around the hole and used Curviloft to generate the surface.

2022年6月13日 · I have a relatively simple shape (a rectangle with an arc cut out of one side) and I want to lower the front edge so that it makes a ramp-like shape. The problem is that it doesn’t seem to be handling some of the curving the way I expected it to. It seems to use a flatter plane for one section of the inclined area but a nice curve for the rest. To lower the front edge, I …