2020年4月1日 · edit: weird, just looked at the owners manual, and the 2.4 has SM, ILSAC GF-4 or above, ACEA A5 or above listed, but the 2.0T only has ACEA A5? Which is weird since their temp chart for the 2.0T allows for 5w-30, 5w-40, 10w-30, 15w-40 and 20w-50, but only 5w-30 meets the A5 spec. there is a little disclaimer at the bottom of the temp chart that ...

2024年9月24日 · Was just comparing acea a5/b5 with a3/b4 with the lubrizol relative oil comparison tool (k think it,s called) Even thogh the a3/b4 have a higher HTHS at 3.5 compared to the a5/b5,s 2.9. They where identical on the antiwear probertys.

2023年3月20日 · I'm looking for an oil that's 5W-30 with ACEA A3 or A5 approval. Is there a list of these approved oils anywhere? Through manual searching, I've only really been able to find Castrol Edge Euro 5W-30 and potentially the recently released Mobil 1 FS Euro 5W-30, although I haven't actually seen it being sold anywhere.

2011年12月5日 · It came from ACEA's description of the spec: Quote: A5/B5 Stable, stay-in-grade oil intended or use at extended drain intervals in high performance gasoline engines and car & light van diesel engines designed to be capable of using low friction low viscosity oils with a High temperature / High shear rate (HTHS) viscosity of 2.9 to 3.5 mPa.s ...

2010年2月7日 · For most cars, the specification ACEA A5/B5 ILSAC GF-4/5 is recommended. Example of LEXUS, TOYOTA. How the use of oil of the same viscosity, but in the A3/B3/B3/B4 specification, affects wear and engine protection? There is a theory that A5/B5 light running oils cause less high-temperature deposits, lacquers and deposits, especially on the rings.

2015年3月20日 · Nope. ACEA A5/B5 and SAE xW-40 are mutually exclusive. According to SAE J300 an xW-40 grade must be >3.5 cP (for x=0, 5 & 10) or >3.7 cP (for x=15, 20 & 25). Originally Posted by 1JZ_E46 A3/B4 and A5/B5 must pass the …

2010年12月29日 · The legacy ACEA categories (A3/B4, A5/B5, C2, C3, C4, and C5) still lack LSPI and timing-chain wear protection and provide inferior valvetrain wear protection than API SP/RC (ILSAC GF-6) does. However, the new ACEA categories (A7/B7 and C6) provide LSPI and timing-chain wear protection and provide the same valvetrain wear protection as API SP ...

2013年11月8日 · I have some older Platinum 5W-30/10W-30 5 qt. jugs in my stash. The labels say it meets A5/B5-04. I was at the store last week, and looked over the Platinum bottles they had on the shelf. I noticed it said A1, no more A5/B5. I thought that was interesting. Mobil 1 5W-30/10W-30 says it meets A1/B1 and A5/B5, and Valvoline Synpower says it meets ...

2017年5月11日 · ACEA specifications are World wide specs ( not NA) , but Euro manufacturers specifi that in NA as well. A5/B5 is a FE (fuel economy), high SAPS specification that is primarily Ford's. Volvo and Jaguar somewhat inherited that.

2017年6月30日 · A1/B1 is mid-SAPS, while A3/B4 and A5/B5 are high-SAPS. Many car manufactures are recommending low-SAPS (such as ACEA C1 and ACEA C4 and also ACEA C2 and ACEA C3 to some extent) for direct-injection engines, as high-SAPS oils have shown to lead to catastrophic intake-valve deposits in these engines.