The F-series FENA-21 is a 2-port Ethernet adapter supporting several communication protocols: PROFINET IO, EtherNet/IP and Modbus TCP. The selection for the protocol is done via a parameter in a drive.

FENA以太网适配器用作EtherNet/IP服务器，支持ODVA AC/DC Drive、ABB变频器和Transparent配置文件。 该适配器模块既支持对一类的每个属性分别进行设置的显式报文，也支持使用输入和输出实例的隐式报文。

The FENA-01/-11/-21 Ethernet adapter module is an optional device for ABB drives which enables the connection of the drive to an Ethernet network. Through the adapter module you can:

The FENA-01 Ethernet Adapter module is an optional device for ABB drives which enables the connection of the drive to an Ethernet network. The module supports a variety of higher-level communications protocols, including EtherNet/IP.

To control the drive with the adapter module, set at least the basic parameters listed in the table below. For full parameter descriptions, refer to the adapter module’s user manual or to the drive’s firmware manual. Enable (or select the option slot in which the module is installed). This activates the communication module.

ABB Library is a web tool for searching for documents related to ABB products and services.

The ABB FENA-21 3AUA0000089109 Two-port Ethernet Adapter facilitates seamless integration of industrial equipment with networked systems, enabling enhanced connectivity, data exchange, and automation in manufacturing environments.

This document will provide an overview on how to import and configure the ABB Add-on Instructions using RSLogix 5000™ / Studio 5000™ version 16 Intended for use United States.

FENA以太网适配器用作EtherNet/IP服务器，支持ODVA AC/DC Drive、ABB变频器和Transparent配置文件。 适配器模块既支持对一类的每个属性分别进行设置的显式报文，也支持使用输入和输出实例的隐式报文。

This example shows how to configure PROFINET IO communication between an ABB AC500 PLC and the adapter module FENA-21 using Automation builder. The same procedure is applicable for FPNO-21 adapter module.