2020年4月25日 · There was AA#2, and then some time between 1991 and 1996 there was AA#2 Improved. Don't know if that coincided with the end of surplus and beginning of contract produced powder or not. I remember the cans being clearly indicated on the label which was which. The load data AA provided changed with the change in naming.

2011年2月15日 · For instance, the start load for AA #2 for a .38 Special 148 gr DEWC is 2.6 gr on line, and 3.2 gr in manual #1 from 1994 The 158 gr. SWC is the same 3.6 start load from the 17 year old manual and online.

2019年8月29日 · I use AA#2, HP-38 and Ramshot Silhouette in 6 different guns and 8 different bullets. In all I love the HP-38 in all but the 45ACP. Tired it with a number of different weights and just don't like it. The Silhouette has shot well in everything and the AA#2 in order I Love it in the 45, then the 380 and then the 9mm.

2022年2月1日 · I do own a g2c and have used AA#2 for reloads using the mihec 125gr fn hp bullet, lee's 124gr tc bullet [IMG] [/IMG] My g2c pictured above is an early version of them, picked it up when they 1st came out. The bbl is fully throated. My understanding is the later/newer g2c's don't have throated bbl's.

2014年9月10日 · I've been using Bulseye, Unique and 231 all along but never AA#2 due to good results with the powders I've mentioned. Lately I acquired the #2 powder because beggars cannot be choosers. To make a long story short, I reloaded some .45 ACP rounds with 200 SWC Lyman bullets and 5.5 rains of #2. AA powders suggest starting at 5.2 to 5.8 max.

2016年7月18日 · I loaded up two different loads for light target shooting, 1= 158 gr MBC Hi-Tek .38 Match bullets,4.7 grs Accurate No 2,with WSP primers Load 2 = same components but a 5.3 gr charge of No.2. I would like some suggestions and wisdom with Accurate No 2 used for 357 mag loadings, I use Trail Boss now for my light 357 mag target loads and like it ...

2022年4月8日 · A tapered wad like a Winchester AA has a gas seal about .700". A straight wad like a Federal 12S3 has a gas seal around .715". It isn't a huge difference. Plus most shot cups are around .730", so technically all plastic wads are tapered. The hull is the main difference. A Winchester tapered hull turns out to be an interference fit with their AA.

2020年1月26日 · Lists fed 410sc wad, you want the wad a good fit to the hull for a good gas seal. Chef diet primer also listed, they are very close to Win. primers first load data, but are larger dia. Win, CCI ect will fall out of the European hulls, and stretch your AA. I have used 10s of thousands of “euro trash” primers, work just fine.

2024年3月8日 · Cartridge : .32 H&R Magnum Bullet : 100 gr x 0.5" long WC Cartridge O.A.L. L6: 1.150 inch = 29.21 mm Barrel Length : 3.5 inch = 88.9 mm C A U T I O N : any load listed can result in a powder charge that falls below minimum suggested loads or exceeds maximum suggested loads as presented in current handloading manuals.

2012年9月8日 · I am trying to come up with a recipe or a starting place for some of the components I have. I have: Many AA Hulls (from someone else) Some Wal-Mart Remington and Winchester cheap buckshot hulls (that I've fired) WAA12 Wads Winchester 209 primers 1 lb Blue Dot powder 7-8 lbs Hi Skor 700x powder Hornady 00 buckshot