2008年1月16日 · 7,62x45 and Wildcats: The cheapest manner of making 7,62x45 and any derived wildcats is to use Prvi Partizan 6,5mm Carcano Brass, and simply resize (several steps may be required) and trim/anneal. Cases are Boxer large rifle, and ideal for the job.

2008年12月28日 · On pg 16 of THE CESKOSLOVENSKA ZBROJOVKA VZOR CZ52&CZ52/57 by Thimsen, he lists a loading of 27.6-32.4 gr IMR 3031, bullet weight 131.7, .311/.312 diameter yielding 2450 FPS. He also lists 37 gr W748, 123 gr PSP by Win, .311/.312 diameter yielding 2650 FPS. It goes without saying, use at your...

2017年3月13日 · RCBS 7.62x45 Czech dies (custom at the tyme) no rim modifications needed of course. 118.4 grain .310 inch diameter Lyman U311359 gas check cast bullet, 27.0 grains IMR 3031 powder, CCI#200primers functioned Just Fine. Intend to develop a load for .311 inch diameter 130 grain Norma SP bullets with WC 860 powder but haven't got around to it yet.

2020年6月30日 · Any 7.62x45 headstamped before 1960 uses large Bredan primers (after that they used smaller primers) which can be drilled out leaving the rim of the old primer and a Boxer primer can be used. You will have some mess ups but this is a reason to keep your early brass.

2007年10月6日 · Reloading 7.62X45 There is a group buy going on for Lee dies on another forum. Check with Lee and see if they are in production. The original steel case ammo usually has a lot of rust in the inside and most of the primers are dead. The bullets are nearly welded in the case by the rust. Difficult to pull, even with a collet puller.

2014年1月19日 · Buffalo Arms is now getting in brass to make 7.62x45 Czech (they said that they were tired of waiting for their supplying brass manufacturer, so they found another source). I was on back-order for 2 years, and they gave me a call. Price is about $2.00 each, or about $104.00 per hundred. I paid about $10.00 shipping on 100 rounds of brass.

2023年6月22日 · I do not know if the brass cased 7,62x45 is common or kind of rare but I did save a box. Years ago some steel case 7,62x45 was used to form 7,62x39. During this time period, the Soviet 7,62x39 was very difficult to find and other donor cartridges were used such as 6,5 MS and 6,5 Carcano too. I still have some 7,62x39 forum from 7,62x45 cartridges.

2016年8月20日 · Today I was searching for various parts for a project and found a site that claims to have 7.62x45 ammo available. Try thedealershowroom.com and look at their ammo selections. I did not notice an e-mail contact for them, will have to call them at 541-882-4249 to get confirmation they have this caliber in stock.

2020年2月27日 · New designs were tested. The CZ502 won out with the best results designed by Jan Kratochvil. In 1952 it was adopted as the VZ52 in 7.62x45 which is a mid-range cartridge influenced by the German 7.92x33 Kurz cartridge used in the Sturmgewehr 44. This falls right between the 2 popular soviet cartridges 7.62x39 and 7.62x54r.

2022年4月2日 · These are 220 swift cases cut down and reformed into 7.62x45. I use a RCBS sizing die to accomplish this. I also have a metal lathe to trim length and recut the rim and extractor recess on the case. I made up a profile cutting tool that matches the Mil spec cases. I have seen about a half dozen, or more different "parent" cases used for this.