2012年1月19日 · 2011 JK Rubicon 2 door 6-speed manual, 3.5" Rock Krawler Suspension lift, 1.25" Daystar body lift, 40x13.50R17 Nitto Mud Grapplers My build thread Save Share

2012年6月19日 · A GM 2.8L V-6 was purchased for the XJ Cherokee until the 4.0L six was ready (1984 and 1985). Jeep marketing planners felt that a six-cylinder engine was needed to help sales. It is believed that the 2.8L was chosen because it shared the same bell housing pattern and transmissions as the 2.5L AMC four.

2009年10月6日 · on the straight 6, she'll run anywhere from TDC to about 13 advanced, i suggest pulling the oil fill cap off and turn till the rocker arms move, watch the arms, the exhaust one will go down, then up, keep going, then the intake one will go down, once it comes up and stops, that's TDC, look at tht timing mark, it should be on TDC, now set the mark to whereever it should be. toss the distributor ...

2003年11月12日 · '87 Wrangler YJ 4.2 I6 (sorry, sold) JuiceBox ignition 2 1/2" ProComp Lift 31" BFG A/T's K&N Filter Custom Rock Guards Turbo Muffler Rear Track Bar in the shed Other Tricks I won't tell to just anybody! '99 Grand Cherokee 4.7 V8 Towing Package K&N FIPK ProComp MX6 shocks Borla Exhaust Tow Hooks Alpine CD …

2020年4月28日 · #2 - the rocker arm failure is not common on the cherokee 3.2 liter engine - - but, is extremely common on chryslers 3.6 liter engine that is used in the grand cherokee, minivan's, chrysler 300 - so, all those cars get the ticking from upper end issue,

2018年11月13日 · The test drive went well and we worked out a fair deal with the dealership, and drove the Jeep home. The dealer offered the standard 30 day, 1000 mile 50/50 warranty. Two days into owning the Jeep, the CEL Light came on. We got it scanned and it came back as P0302 - Cyl. 2 Misfire! I had read this was the main indicator of the cylinder head issue.

2012年1月14日 · pass. side is bank 2. if you are looking for sensor 1 that would be the upstream sensor, 2 is the downstream sensor. 2007 v6: Rough Country kit, Aries taillight gaurds, 2457517 Wrangler Silent Armors, LED interior lights, painted oe wheels Gunmetal, Topline 1.5" wheel spacers,SOLID rear diff cover,CREE backup lights,Hypertech Programmer

2014年4月1日 · Everything reassembled, I started the Jeep. This took a lot of work - probably because of the Throttle Body cleaner, but who knows. Anyway, it finally started and it was idling MUCH SMOOTHER, lower RPM and much quieter. The two fault codes did not reappear. I took the Jeep for a test drive up a relatively steep graded highway and no fault codes.

2008年9月7日 · I just did a Hedman header 6 to 1, 20 inch long 2.5 in collector into 3 in system and it makes way more torque than stock and pulls nicely from 800 rpm in third gear with 34 inch swampers and stock gearing. Next up for me is recurving the dizzy, Cliffy intake and most likely a Street Demon 2 barrel.

2011年7月13日 · I've got a 92' YJ with a stock powertrain. It currently has the 2.5l engine and AX5 tranny. I've got a fixed budget of $5,000 to spend on this project. I've got access to a shop with all the tools needed and a cousin who is pretty good at fabricating. Once complete the jeep will be about 80% on-road and 20% off.