2015年12月31日 · Essentially, I'm after turbocharged engine that will spool quickly and have enough torque and HP to quickly start moving a heavy truck with a lot of rotational mass of 37"-40" tires. And do so reliably over extended periods. No nitrous, water/meth injection, liquid intercooler, etc. to help bridge the gap.

2022年4月14日 · I’ve had two different 3RZ trucks, one I turbo’d and the other supercharged. With the turbo, I was able to run 8psi on the stock ecu with pink top injectors and a 190 fuel pump. With the S/C, I tried to run that same set up and the ecu made it run pretty weird.

2004年5月8日 · In this installment, we'll examine the block, rotating assembly and oiling system that's designed to withstand the incredible stress of more than 1400 hp at 10,000 rpm. As an option in Toyota's...

6 天之前 · With the 3RZ, either new engine brackets or engine frame mounts will need to be fabricated, exhaust reworked, fuel and clutch lines rerouted, fabricate a hybrid powersteering line (if p/s is desired), mounting various things such as the air flow meter (hot wire), ignitor, fuse box (es), ECU, relays, and vapor canister, and of course do the wirin...

2013年5月23日 · The 3RZ is an interference engine by design. A non-interference engine has a slightly lower compression ratio due to the extra volume of air in the piston "dish outs". In order to improve power output of the 3RZ, Toyota opted for the interference option so that the compression ratio, and thus power output, could be slightly higher.

2013年3月1日 · It has full toyota powertrain and suspension, 2000 3RZFE 2.7L from a tacoma mated to a R151F turbo 5 speed, Toyota axles with High pinion E locker in the front and a V6 Spartan locker on the rear with 4.88 gears. I am running 35-12.50-15 Wrangler kevlars on procomp rock assault wheels.

2013年8月10日 · Tred talked me into using an additional four injector rail instead of 500cc injectors in the stock rail. I'm really glad I went the additional injector route as it was easy to tune and whenever it wasn't in boost it started and ran like stock!

2017年6月25日 · LCE 3rz 10:1 rod and piston kit. 10:1 compression will be perfect for E85. It appears to be a good quality Molnar/Carrillo/CP made in China rod: http://www.lceperformance.com/3RZ-Forged-Piston-H-Beam-Rod-Set …

2019年2月11日 · It is a 1999 3RZ 5 speed 4WD. The engine, transmission, and drivetrain all seem to be in good shape, other than me having to bolt the transmission back into the mount (yikes). The receipts he gave me with the truck suggest that the engine was rebuilt (or at least had extensive internal work done) by Black Label Performance in Colorado Springs ...

2025年2月9日 · Okay, finally started on my 3RZ swap today. Pulled the Old 22R with an Offy Dual plane intake manifold, LCE Pro spiral carb spacer, and a weber 32/36 along with my trans/tcase. Tomorrow I am going to sand and get the engine bay ready for a fresh coat of some good spray paint/Rust prevention. 3rz 198.JPG (137.81 kB, 600x450 - viewed 17054 times.)