ZRH(V) & YRH(V) Copeland™Scroll Horizontal Compressor Ranges for R513A, R454C, R407C and R134a. Air conditioning for passenger comfort is a pre-requisite in today’s public transport vehicles. At the same time, maximization of passenger space and streamlining of high speed trains increasingly impose limitations on height.

Minimum cut out settings are listed in Table 2. The low pressure cut-out, if installed in the suction line to the compressor, can provide additional protection against a TXV failed in the closed position, a closed liquid line service valve, or a blocked liquid line screen, filter, orifice, or TXV. All of these can starve the compressor

The purpose of these guidelines is to provide guidance in the application of CopelandTM scroll compressors in users’ systems. They are intended to answer the questions raised while designing, assembling and operating a system with these products.

C7.9.1/0703-0104/E 3/11 Technical Information 3 Motor Voltages and Frequencies 3.1 Nominal voltage range A nominal voltage range appertaining to the motor is stated in Select Software and on compressor nameplates as

The fixed and variable speed models from the ZRH range of horizontal scroll compressors are based on the unique Copeland Scroll design and provide the same reliability as standard Copeland Scroll compressors. They feature an oil pump to cover the specific needs of transport air conditioning and horizontal compressor arrangements in general.

ZRH81KTE-TFD-502

The photos you provided may be used to improve Bing image processing services.

Copeland Scroll axial and radial compliance for high reliability. High efficiency and increased heating capacity. High water temperature for all applications. Low sound and low vibration level. Tandem combination for superior seasonal efficiency. Enhanced Vapour Injection technology for best seasonal efficiency.

在LS-PrePost右侧的主菜单中点击Splane命令按钮，打开Section Plane剖切截面定义面板。 在Section Plane剖切截面定义面板中可以很方便的定义和调整截面的位置和方向，可以通过1p+NL（一个节点一个平面）、N1-N2（两个节点）、3Nds（三个节点）、2Nds+D（两个节点和 …

2018年11月7日 · 在Hyperworks/HyperView中单击工具栏中Section Cut命令按钮，打开模型截面剖视图面板。 在Define plane中选择创建截面的向量，并在图形界面中选取创建截面的基点，然后单击Apply按钮即可得到模型剖面图。