2008年1月29日 · 90 to 100 mm race sag. ( with the rider on the bike ) Here's a good tutorial about setting up suspension. http://www.transworldmotocross.com/mx/how_to/article/0,13190,534842,00.html

2008年1月29日 · The manual (section 5-39) shows the standard setting for the forks should be 24mm or 0.94 inch. above the top clamp. Rear sag should be in the 75-85mm range. My son moved from a KX65 to a YZ85 a couple of years ago and now he …

2002年11月16日 · Have heard a lot of conflicting information on set up of static and race sag for the YZ 85. Currently set at 25 and 78 mm. Can anyone provide any positive...

2003年5月12日 · To get 18mm of static sag on the YZ85 I need to be pretty tight on preload and race sag decreases. Race sag should be about 75mm to 85mm max. To get this amount of sag, we need to run more static sag--about 23mm to 25mm or so.

2008年10月16日 · Set race sag to 85mm - then static should be 18mm if sprung right for rider weight (+/-3mm). If you are outside of this measurement you need to get a softer or stiffer spring depending on which way it is out.

The race sag is set to insure that the suspension works in its most effective rage and to keep a good chassis weight balance, front to rear. Setting your race sag is also the most important set up in affecting your bike’s overall handling traits.

Standard Sag 85 mm Shaft Nut Torque 25 ft-lbs (34 NM) Shock Oil 2.5 Weight Standard Preload 14 Wheel Travel 282 mm

2019年7月22日 · The 2019 YZ85 offers a full 2 horsepower more from 7000 to almost 8500 rpm compared to its predecessor. Two ponies might not sound like a lot, but for a YZ85 that is close to a 10 percent...

2010年4月20日 · How much rear race sag should a YZ85 have? I have my son's set at 3.25" The guide that I used said to have 3.875" sag, but that was on a big bike. I figure a mini should have less.

2008年1月29日 · I am clueless on where the suspension settings should be on the 2003 yz85. He is racing MX (beginner class) About 90 lbs with gear. Average rider (hoping to get better) Need to know rear sag ????? Rear Compression and Rebound ????? Front fork height (how far up in the clamps from the top) ??? Front compression and rebound. Any help would be ...