2016年5月25日 · Slide the new Fuser into the printer aligning the two pins on the left into the printer. Slide the right side of the Fuser into the printer, and then push inward to lock the Fuser into place. Make sure the latches are fully locked.

2024年9月17日 · Remove the fuser unit from the printer. Unpack and insert the new fuser unit into the printer until it clicks into place. To lock the fuser, rotate both the knobs clockwise until it is tight.

Xerox Genuine Fuser is specially formulated and tested to provide the best image quality and most reliable printing you can count on page after page. Xerox Genuine Supplies and Xerox equipment are made for each other. Accept no imitations. Approximate pages. Declared Yield on Drums based on an average job size of 3 pages A4/letter size.

Pull the fuser slightly out of the printer. Push the fuser completely into the printer. Tighten the screws on each side of the fuser. If the error continue, replace the fuser with a new fuser. See the installation instructions that came with the fuser. Turn on the printer. If the problem persists, access PhaserSMART®.

Unpack and insert the new fuser unit into the printer until it clicks into place.

Push up on the release button on the left side of the Fuser to unlock the Fuser. Keep the release button pressed in, and then pull the Fuser out of the printer. Place the old fuser aside for recycling.

Changing a fuser unit can be difficult if you don't know where to look. This is a simple, quick guide on how to change one in a Xerox WorkCentre printer.

Lift up the latches and slide inward to release the fuser. Holding the release tabs, pull the fuser out of the printer and then insert the fuser (or new fuser) into the printer until you hear a click.

This genuine Xerox 110-volt fuser/belt cleaner assembly is designed specifically for your Phaser 7500 to keep it operating at optimal performance. Xerox fuser units are long-lasting and easy to replace. Don't settle for cheap imitations. The 115R00061 fuser yields up to 100,000 pages.

Xerox Fuser Unit (120V) is specially formulated and tested to provide the best image quality and most reliable printing you can count on page after page. Xerox Genuine Supplies and Xerox equipment are made for each other.

2023年9月11日 · Xerox fusers are designed to work with specific copier printer models and are also made to be easy to replace so you can get back to work as soon as possible. However, it sometimes helps to have someone walk you through the process step-by-step.

Printer Error - Fuser. There is a problem with the fuser: Turn off the printer. Open the top cover. Turn the fuser locking lever to the right to release it, and then use the fuser handle to lift the fuser out of the printer. Warning: Be careful not to touch the sides of the fuser; they may be hot.

List of all Xerox Centers / Repairs in U.S.A. (Multifunction Printers, Printers, Copiers, Software and Solutions, Scanners, ConnectKey™ Products, Solid Ink Products and more).

Use our dealer locator to easily find an authorized US reseller of Xerox printers near you

2021年7月15日 · Open the Bypass Tray (Paper Tray 5), located on the left side of the printer, by rotating it outward. Lift up on the release lever on the Top Left Cover A to open the cover. Wait at least 40 minutes for the Fuser Assembly to cool.

2019年10月7日 · Push up on the tabs on both sides of the fuser, and then carefully pull the fuser out of the machine. Place the fuser aside for recycling. Remove the protective material from the new fuser.

offer printer repair for major printer brands such as HP Printers, Xerox Printers, Ricoh and Lexmark. Please call our sales and service department for more information or to schedule a site visit in St. Louis.

Keep the release button pressed in, and then pull the Fuser out of the printer. Line up the knobs on either side of the new Fuser with the slots in the printer, and then push the Fuser into the printer until the Fuser clicks into place. Close the Rear Door. Plug in the power cord on the back of the printer and the ethernet cable, if required.

Contact Xerox for sales, customer service, technical support & other inquiries. Find all department contact numbers, email addresses & more.

2025年2月4日 · Replace The Fuser Assembly Video. Replace the Bias Transfer Roll Video. Note: The images provided are for demonstration purposes only and may vary slightly from your printer. Power the printer off. Unplug the power cord from the machine and allow the printer to cool down for approximately 40 minutes. When the printer has cooled, open the rear door.