2020年10月6日 · The second thing, specific to an XM177E2, is how "authentic looking" do you want to go. An E2 had an 11.5" barrel with a moderator; this did not add up to the 16" of barrel length that the ATF requires for a civilian rifle. So, if you …

2018年6月13日 · I was issued an XM177E2 back in 1991 in 2nd Ranger Batt and still have my Arms Room Card. Bought an 80% lower and sent it to Braceman for engraving and re-profiling which turned out fantastic. Been putting together parts for the past few months and finally able to start painting soon (w/Norrels dark gray) and putting it together.

2015年6月16日 · Some of the main issues you will come across is getting the proper 4.5" moderator/grenade ring (XM177E2) and CAR stock (older Colt or a new Essential Arms). The retro receiver Extension Nut is available . You can get the 2-position receiver extension from Nodak Spud along with the upper and lower if you so choose.

2015年8月21日 · operation, maintenance, repair and replacemement parts submachinegun gun, 5.56-mm, xm177e2. JULY 1967 And in the picture shown it's a little bit larger than the standard split washer.

2018年5月20日 · Don't know if this will help or add more grief. Top barrel is a real deal XM177E2 barrel laid on top of my clone XM177E2. The moderator is a Bricks correct size one and the grenade washer is one of his too.. The clone barrel was cut by …

2016年5月9日 · So the RBR sight shows the proper roll marks for a 629 as the following:PROPERTYOF U.S. GOVTCOMMANDOCAL. 556MMSER XXXXXXMy question is, I have been told that those are the E1 markings and the E2 has a

2019年3月20日 · I am going a slightly different route to get to a XM177E2. There are three, out of the box, retro XM177E2 rifles available at this time. They are the Colt, the Troy and the Brownell’s. While each is close, none is a perfect match to the original rifles. Each each has its own strengths, and its own flaws.

2021年3月9日 · The XM177E2 and GAU-5/A/A (models 629 and 630, respectively) both entered service around late 1967 (possibly 1968 for USAF). Every one of them had a "full fence" lower receiver. The first production batch of XM177E2 (which consisted of only 510 carbines) went to MACV-SOG and they had them by September 1967.

2020年7月17日 · M14 sling on my XM177E2 clone. Posted: 7/17/2020 3:13:48 PM EDT [#4] Quote History. Quoted: They were used ...

2019年9月10日 · So jealous, carried an xm177e2 early 90's in the Rangers as a Fister. Built one up using as much original as I could get my hands on. Had my lower match the one I carried even with my s/n (still have my arms room card). Only thing I'm lacking to be original is of course lower, true xm177e2 barrel, and compensator!