Dimensions, weight, section properties, and essential data of American wide flange steel beams (W-beams) according to the ASTM A6 standard. W-beams - wide flange beams - are stout, sturdy beams with wide flanges positioned perpendicularly to the web of the material giving them their characteristic shape and distinguishing them from I-beams.

Aug 9, 2020 · The most obvious difference from W-shapes is the slope of 2:12 (approximately 16.67%) on the inner flange surfaces. One consequence of this is that tapered washers are needed for bolted connections. But then, many of these sections have flanges too small to have a workable gauge for bolting anyhow.

Sep 15, 2023 · W piles for solar racks and trackers are most common of the W6 family (height approximately 6 inches), and either 7 pounds per square foot (W6X7) or 9 pounds per square foot (W6X9). W piles are typically made of steel with yield strength about 50 ksi (thousand pounds per square inch). Figure 1: Typical W and C piles.

Apr 21, 2022 · The main difference between W beams is that the inner and outer flange surfaces are parallel. Furthermore, the overall beam must have a depth that is at least equal to the flange width. Usually, its depth is significantly greater than its width.

The steel beam dimensions for the W6x15 section can be seen in the table. The depth of the section is 5.99 in. The width of the section is 5.99 in. The W6x15 section has an area of 4.43in 2. The below table outlines the W6x15 section properties including the torsion constant as well as moment of inertia and plastic modulus properties.

Here you'll find all American Wide Flange Bearing Pile shapes described by the AISC Steel shapes database (V14.1). Sort the table below according to any property and select a CAD file to download using the reference links in the left-most column.

Sep 21, 2023 · Sheet piles, crane rails, and W sections in structural steel are essential components in modern construction and engineering. Their various types and applications highlight their adaptability and significance in a wide range of projects, from waterfront retaining walls to industrial cranes and towering skyscrapers.

Best suited for friction pile in granular soil. Available in various sizes, sections and lengths. Easy to splice. High capacities possible. Low soil displacements. Pile toe protection may assist in penetrating harder layers or some small obstructions. Vulnerable to corrosion where exposed.

Every Pile Integrity Tester (PIT) includes one license of PIT-W Standard. This software reprocesses PIT data, averages, filters and magnifies records, analyzes records in the time domain and outputs user customized tables, plots, and reports.

Deep foundations, generically referred to herein as piles, can be driven piles, drilled shafts, micropiles, and grouted-in-place piles. Vertical ground anchors (tie-downs) are also classified as deep foundations. Piles can be used in a group with a cap footing, or as a single pile/shaft supporting a column.