
varget and 308 loads | Sniper's Hide Forum
2013年3月12日 · varget and 308 loads Look in the .308 loads section. They're all there. 42-45 is the spread, depending on chamber and seating depth. If your rifle doesn't shoot well with any reasonable Varget load you have a gun problem. Personally, I would also try 4895 and BLC(2) in a 20" barrel, but Varget will work fine.
4895 vs varget pros and cons | Sniper's Hide Forum
2003年12月29日 · Re: 4895 vs varget pros and cons Varget and RL15 are really the only 2 powders that work well for me in my 308 and 223. Every time I try a new powder, like IMR4895, 4064, Viht N540 or N140, my results are very ambiguous to decipher if …
Alliant reloader 15 vs varget - Sniper's Hide
2014年2月24日 · I prefer RL-15 over Varget for my 175MK load out of my 308. While I do use Varget for other loads, RL-15 works best for me behind the 175MK. I'm getting 2821fps, ES-5, SD-1.9 with my last time through the chrono. I haven't been able to get that speed or consistency with Varget. RL-15 doesn't work so well for me with the lighter 155gr. bullets.
Varget Vs. Vihtavuori N150 powder comparison? - Sniper's Hide
2007年2月2日 · The VV manual lists 150 as being a tad slower than Varget, but similar to H-4350. Unfortunately, burn rate charts can be deceiving because different powders have different burn rate characteristics in different cartridges.
Varget in 223 Rem loads? - Long Range Hunting Forum
2022年4月3日 · I've found Varget and Benchmark to yield similar results for accuracy. I actually have a canister of Benchmark in my cabinet if you're near PA. I decided long ago just to go with Varget since at the time the price difference was about $5 cheaper than Benchmark and I was going through A LOT of Varget powder. Start about 21.5 grains and work up.
308 loads with varget powder? | Sniper's Hide Forum
2009年2月18日 · Re: 308 loads with varget powder? Works great for my rifles using the 168 gr SMK (not moly), BR2 or GM210M primers, and any non 7.62 brass (military cases have less case capacity so that load has felt like max in my rifles using mil cases), like Lapua, Remington, Winchester, etc.
Varget load for 6.5 Creedmoor | Sniper's Hide Forum
2010年1月21日 · Re: Varget load for 6.5 Creedmoor If you are set on using Varget in your creedmore, try some 123 SMK's. They shoot extremely well out of my 1/8 Brux with 38.6gr of Varget. Won't set any speed records as I ave about 2775 but out to 300 yards the accuracy is right there with any thing else Ive tried.
6MM GT load data - Long Range Hunting Forum
2025年2月21日 · Using the 109 LRHT. I went up a node to 2950fps. I got better ES. Less than 5 now. 35.0 grain Varget. Federal Match 205 primer. Alpha brass. But I found my best accuracy with a 80 thou jump. I know, seems wrong, but I tried it at 5 off, and worked my way back. They were all pretty good, but at 80 off I can stay at 1/4 moa all the way to a 1,000 ...
Varget and the .223 | Sniper's Hide Forum
2007年5月28日 · I get 100FPS higher velosity with 2520 over Varget, and I can throw the 2520 charges more accurate than my chargemaster can trickle varget. (2880 FPS with 75grain Hornady Match) Varget is still my 308 powder and its great, but AA2520 is cheaper, available at numerous places, flows like water, and you get higher velosity.
75 grain hornady 223 varget loads | Sniper's Hide Forum
2003年12月29日 · Re: 75 grain hornady 223 varget loads Well I went out last night and shot several varget loads ranging from 23 up to 25 grains in .5 grain increments.this was using properly prepped us gi brass , cci 400 primers and the bullets seated to 2.270 coal. I was shooting them out of a rock river 1:8 20 inch hb ar.