2024年12月26日 · Hi all. I am planning to do do some maintenance on my snowblower. When I tried to check the tire pressure the gauge didn't move. Im guess they are tubeless. How can I check the pressure? The gauge works fine on my car. Its a Craftsman 24" blower.

2021年12月13日 · Buying 15" tires on a machine that takes 14" (actually 13.5") means you would need to drop the scraper bar down 3/4 inch to level the machine. Any tire chains added with only increase the problem. Even if you could gain that much it would eliminate any future adjustment of the bar for wear, all to save a few bucks on the right sized tires doesn ...

2016年11月8日 · Hey guys, need some advice. I got in new tires and tubes for my Ariens 20" compact snow-blower (model 922006 / 922003). The tire size is 410-4 (4.10-3.50 x 4) on this unit. I obviously need to re-inflate the new tires to some kind of pressure. The max PSI on the tires says 24 PSI. I looked...

2017年11月16日 · FLSTN, you were right on the money. I thought the tires were stretched out, because the beads seemed very flimsy, but the metal rings on both came off the grooves. I removed the tubes, reinstalled the rings, added new valves, and they hold air just fine at about 8psi. But the tires seem very soft, making the whole snowblower a bit wobbly.

2018年2月21日 · Yes, the Carlisle X-Trac 15" x 5" x 6" is a great replacement tire for your HS55 rims. My only suggestion would be to avoid going tubeless and add 15" x 5" x 6" inner tubes with T87 (90 degree) valves.

2022年6月11日 · Hi, I have a set of 16x6.5-8 tires from an MTD snowblower that are in really bad shape. The snowblower itself has a few years left on it. They are tubeless, but don't hold air anymore. Instead of spending the $100 to replace them, can I get away with spending $20 on tubes and using them...

2014年10月8日 · Last year we bought a McCulloch snowblower with some pretty aggressive looking tires on it. However, under some conditions, it turns out not to have enough traction to pull itself up the steepest part of our driveway (which is a 1 in 3 grade). I wanted to get a set of chains for it to help with...

2010年12月6日 · I noticed the tires on my blower (JD522) looked to be low, before I just arbitrarily pump them up I have a couple of questions. Is the tire PSI based on make/model snow blower or is there a pretty standard PSI to use? Do you run the same PSI with or without chains? Dan

2021年6月16日 · I have a Craftsman Snowblower with 15 x 5.0 - 6 tubeless tires. It's getting old and has bead leak. Probably due to rust. Flat fixed didn't last. i read that you shouldn't put tubes in tubeless tires. I can't see why not. Not like it will cause tire to overheat at those high speeds.

2015年1月28日 · so, my tires are old, dry rotted and aren't all that round anymore. The tire size is confusing to me. I wanted to get some tires that had wider spaced lugs on it for better snow traction. The tires say 4.10/3.5 - 6 not exactly sure what that …