2017年2月17日 · Lots of people use Seafoam and Stabil through their pwc without any issues, but I am not a fan. I prefer to consistently use K100MG in my machines with every tank to keep phase separation and ethanol at bay.

2011年7月17日 · A 2 cycle engine needs to get the cylinders lubricated via the oil in the fuel mix. If you use a solvent that removes or breaks down that oil, you are putting more wear on the engine than necessary. So while Sea Foam may help keep the fuel system cleaner, the impact it has on the pistons and cylinders could be detrimental.

2009年6月11日 · The sea foam is what’s fouling your plugs, and not the crud. You will foul plugs until its run threw.

2011年4月11日 · So I've started pulling all the upholstery off my seats so I can reupholster them and am trying to figure out the best way to repair the foam. Any suggestions? I was going to change colors but cost kept me with the original color. thanks for any suggestions! (click me)

2011年11月2日 · Lubricates upper cylinders, fuel pumps, turbochargers, drawn-through superchargers, and related fuel system and exhaust system components. Sea Foam® Motor Treatment is a 100% blended petroleum product. That means Sea Foam® is OIL, so adding Sea Foam® to ANY fuel adds lubricity to fuel system components and upper cylinder areas of your …

2014年7月3日 · I don't follow the logic of sea-foam leading to clogged fuel lines & melted engines but I'm a newbie in all of this. I just bought my first boat and the guy who sold it to me was a big sea-foam proponent. That's basically the extent of what I know. For what it's worth, here's an article about various additives used for anti-corrosion purposes.

2020年6月10日 · Have had issues with the ski bogging down and the low oil light coming on. Began reading on here and found out that Sea Foam is a No Go after my son decided to put some in without asking. Any ideas on how to remedy this and protect the engine?

2014年6月4日 · 2-Stroke Sea-Doo PWC Forum . Seafoam. Thread starter black charger; Start date Jun 4 ...

2019年1月21日 · You can always remove the seat support, back the ski down on the boat ramp, and fire it up. Another option that I have used is to Sea Foam the engine. After the 5 minute time period between finishing the Sea Foam application and starting the engine back up, the Sea Foam emulsifies all the carbon deposits and the ski will smoke like crazy.

2015年10月30日 · I know the oem will install for free if you buy the replacement foam from them and send in your bar. After looking into it with shipping back and forth it was about $35. Just wanted to show a cheaper alternative for anyone interested. A buddy suggested I look into closed cell foam tubes used for bike grips or tool handles. Here's what I got.