2019年10月6日 · I find them to be a good pistol , got a sr9 a few years ago , bought 3 of the 9e , same thing but no loaded round indicator and not as rounded or some such less aesthetic appeal , really can not tell one from other at a glance , my son in law likes the 9e , friends daughter loves her 9e , spare magazines are a little spendy , shop around and you can find them in the 2 pack for a decent price ...

2016年12月15日 · I load a LEE 356-120 TC boolit sized to .356 and it shoots good thru my P85, Kel-Tec P-11 and my Taurus 92 but the SR9 hates that load, 7-8 inch groups at 25 feet. Edit to add, I just got to thinking that the SR9 may not like my cast load because I have the boolit seated a little deeper, to 1.060" to work the best in my Kel-Tec.

2022年10月13日 · Back in the Obama shortage, I picked up a pound of Green Dot as it was about all that was on the shelf and I tried it until I ran across a 8 lb jug of Red Dot. I was using a Ideal/Lyman 358242 120 isn grain round nose - loading for a Ruger SR9 and a Smith Shield. It worked just fine but as mentioned above e, it was a bit dirtier but not bad.

2008年2月26日 · Thread: Ruger SR9 with lead? Thread Tools. Show Printable Version; 02-26-2008, 12:30 PM #1. USARO4. View ...

2013年3月2日 · Since I've found Titegroup I have been wishing I didn't have such a large inventory of Bullseye. Use it in the 9mm (SR9), 45 colt and 45 ACP. Really tightened up my groups on the 45 ACP. Burns cleaner and meters better. I …

2013年11月8日 · Your SR9 will love 3.5 grains Bullseye and Lee 356-120-TC loaded to 1.053. Range scrap works great for boolits, I would advise water dropping out of the mold for surface hardening. Pan lube with 50/50 beeswax-alox. You probably won't even need to size 'em but if you do then .357 is perfect.

2015年12月12日 · I have the SR9 and found it favors Bulleye powder My cast load is 95 gr. .356 dia: with 4.0 grains of bulleye a t 1.100 My steel plate matches I use extreme 135 gr. R.N.F.P. with 3.5 grains bulleye powder at 1.140

2019年11月2日 · My Ruger SR9, 4.1" bbl, using 6.1 gr Alliant Power Pistol powder pushing a Lee 124-2R runs approx. 1050fps IIRC, & is very accurate for"me" & that handgun, out to 25 yds. IIRC, the MAX for those rounds would be around 1150fps or so @ somewhere around 6.3 or so grains. < Don't recall right now...

2015年9月8日 · In working up a load with that particular boolit weight with BE - I had to increase to around 4.2 gr. for the SR9. Below that, I was getting failure to eject, failure to feed issues as the lower grain weight of the boolit and the normal 3.7 - 3.9 gr of BE was not enough to cycle the slide all the way back.

2018年10月30日 · I've shot near pure (very soft) boolit that were tumble lubed with alox and had terrible leading problems. The same boolet same load powder coated leaves a shiny clean barrel. (Lee 124 grain tumble lube in a Ruger SR9)