refer to agrd part 3 section 4.6.4 and vrs section 4.6.4 for the recommended use of kerbs and channels 4. TRANSITIONS BETWEEN KERB TYPES SHOULD BE DEVELOPED OVER ONE METRE (MIN)

as 2876 concrete kerbs and channels (gutters) as 1379 specification and supply of concrete s m b b c c a a 3. concrete shall be normal - class n25 standard strength grade complying with the requirements of as 1379 2. chamfers are 15x15 unless shown otherwise 1. all dimensions are in millimetres 5 0 0 m n 5 0 0 m in t r a n s it io n (sm2 to m2 ...

SD 216 Double Channel Grated Pit – SM2 & SM2(Mod) Kerb & Channel SD 220 * Grated Side Entry Pit – Barrier & Semi Mountable Kerb & Channel SD 225 Grated Pit For Reserves, Channels & Paved Areas SD 230 Junction Pit SD 235 Easement Pit (600 x 600mm) SD 240 V-Notch Pit SD 245 Haunched Pits - For Pipes Over 450mm Dia. or Deeper Than 2.0m ...

Kerb profiles make it easy to shape kerb and channel when doing infills or replacing sections of kerb. The profiles have tabs that enable them to be fixed to the boxing. The profile provides a shape to screed off when creating the kerb.

line of kerb 15r lip of kerb r75 sm2 r75 r225 110 190 150 min 125 9 600 lip of kerb line of kerb 15r sm3 10r 150 min 300 15r line/lip of kerb 50 m1 40 150 min 600 lip of kerb line of kerb 15r 50 300 sharp transition 300 300 9 150 min 600 lip of kerb m3 300 15r 50 sharp transition notes: 1. concrete shall be normal class n25 standard strength ...

CONCRETE TO BE SMOOTH TROWELLED FINISHED ON TRAY AND KERB. CONCRETE SPONGE FINISHED ON LAYBACK. ELIMINATE 25mm BULLNOSE ON ALL POSITIVE FALL PEDESTRIAN CROSSINGS. WIDTHS SPECIFIED IN CROSS SECTIONS ARE FACE (LINE) OF KERB MINIMUM. LINE OF KERB IS USED TO DETERMINE CARRIAGEWAY WIDTHS.

REFER TO AS. 2876-2000 CONCRETE KERBS AND CHANNELS FOR SPECIFIC REQUIREMENTS. REFER TO AUSTROADS GUIDE TO ROAD DESIGN PART 3: GEOMETRIC DESIGN FOR THE RECOMMENDED USE OF KERBS AND CHANNELS. CONCRETE SHALL BE NORMAL CLASS N25 STANDARD STRENGTH GRADE COMPLYING WITH THE REQUIREMENTS OF AS. 1379.

Key information includes dimensions for kerbs such as 40, 110, 150, and 300. It also lists radii for curves like R15, R25, R100, and amendment dates. This document appears to contain details for road construction including dimensions for kerbs and notes on amendments.

mountable kerbs m4, m5 and m6 are designed to discourage most traffic from mounting a traffic island or median except for long or over dimensional vehicles, eg. the kerb on the outer edge of the mountable apron of a roundabout's central island.

CONCRETE TO BE SMOOTH TROWELLED FINISHED ON TRAY AND KERB. CONCRETE SPONGE FINISHED ON LAYBACK. ELIMINATE 25mm BULLNOSE ON ALL POSITIVE FALL PEDESTRIAN CROSSINGS. WIDTHS SPECIFIED IN CROSS SECTIONS ARE FACE (LINE) OF KERB MINIMUM. MINIMUM CONCRETE STRENGTH TO BE 25 MPA. LINE OF KERB IS USED TO DETERMINE CARRIAGEWAY WIDTHS.