GLC-T vs SFP-GE-T - Cisco Community
2017年3月22日 · SFP-GE-T = 1000BASE-T SFP transceiver module for Category 5 copper wire, extended operating temperature range, RJ-45 connector For me they look the same, with the exception of the extended temperature range. I took two devices in which is highly probable to use them: C4500X and ASR1001X C4500X, will use GLC-T ASR1001X, will use the SFP-GE-T
SFP-GE-T= 1000BASE-T SFP transceiver module for Category 5 copper wire, extended operating temperature range, RJ-45 connector GLC-SX-MM-RGD 1000BASE-SX SFP transceiver module for MMF, 850-nm wavelength, industrial Ethernet, dual LC/PC connector
Solved: SFP-GE-T not working on ASR1001 - Cisco Community
2014年8月18日 · I used another SFP-GE-T with part number 30-1421-01 and it works fine. Anyway the SFPs with part number 30-1421-04 are not broken. I tested them on a Catalyst 3750 and they work fine. Maybe there is an incompatibility between ASR 1001 and SFP-GE-T with part number 30-1421-04. Regards. Stefano
does SFP-GE-T= support 10/100 speed - Cisco Community
2010年9月16日 · SFP-GE-T Modules The 1000BASE-T SFP module (SFP-GE-T) is compliant with IEEE 802.3:2000 and plugs into a standard Gigabit Ethernet SFP module port. It operates on standard Category 5 wiring and has an RJ-45 connector. The SFP-GE-T maximum cabling distance is 328 feet (100 m). The SFP-GE-T is hot-swappable. Autonegotiation is not supported.
SFP Model to Part Number conversion sheet - Cisco Community
2024年10月4日 · Model name “SFP-10G-SR-S” = Part Number 10-3105-01 Model name “SFP-10G-SR” = Part Number 10-2415-03 Model name “SFP-GE-T EXT” = Part Number 30-1421-01 Searching the "Cisco Transceiver Module data sheet", and I don't see any Part Numbers listed. Nor can I find anything out there. Please let me know if there is anything available like ...
ASR1000 シリーズルータにおいて SFP-GE-T ... - Cisco Community
2018年1月10日 · ASR1000 シリーズルータにおいて SFP-GE-T や GLC-TE で Auto-Negotiation がサポートされているのは IOS-XE version 16.5.1 からになります。 それよりの前の version では Auto-Negotiation はサポートされておりません。 この内容については以下にも記載がございま …
ASR1002-X with SFP-GE-T - Cisco Community
2014年11月28日 · Hi all, We are trying to connect an ASR1002-X with 6 SFP-GE-T to a C3750 Switch but the interface never came up in the ASR. They do in the C3750. The SFP we are using are CISCO-FINISAR The interfaces are configured in both sides with no negotiation auto and with speed 1000 and duplex full. I've tes...
3560CX SFP GLC modules - Cisco Community
2015年11月19日 · Hi All, I'm having a hard time to bring up my GLC-T (3rd party) modules with 3560CX compact switches. I tried with SFP-GE-T module as well. Every time when I pulg it says " %PHY-4-SFP_NOT_SUPPORTED: The SFP in Gi0/16 is not supported" I enabled following commands as well. but no use, expect port...
ASR9K: show inventory で SFP-GE-T の description が表示されない
2015年4月24日 · SFP-GE-T は EEPROM に PID、VID 情報を保持していない為、ソフトウェア側で description も空で出力していたことが原因です。 この問題は CSCun99041 として報告されています。
Solved: Router SFP media type unknown - Cisco Community
2017年8月8日 · Hi, ISR 4331 Router recognizes when plugging in the RJ45 SFP but when I do sh int g0/0/2 (where I plugged the sfp in), it says media=type unknown... Router#sh int g0/0/2 GigabitEthernet0/0/2 is down, line protocol is down Hardware is ISR4331-3x1GE, address is 00a3.d186.be22 (bia 00a3.d186.be22) MT...