2025年2月6日 · RAM Mounts is back at AIMExpo with a new universal phone mount that should be a good fit for riders who use their phones for everything while they’re on tour. The new Quick Grip Pro picks up as the next logical step in the RAM Mount lineup, as a universal claw-style mount that locks your phone in place with arms above, below and on the sides.

2021年12月6日 · The Ram system is quite simple and efficient. I got used to it after buying their double take mirrors, which are a must have for all enduro/offroad riders. I then bought the Ram handlebar mount (2 screws clamp) and the ram extension, to extend the whole setup, and finally attach the X-Grip at the end.

2005年6月10日 · fwiw - my 60cx will pop out of the ram mount (cradle) on rough trails. it snaps in tight and it seems like there is no way it could come loose, but it will. ask gordy about his 60csx and the ram cradle . his was a tight fit too - now his gps is somewhere on a trail in buena vista.

2023年2月21日 · The aluminum mount lets the phone move much more than when held by the RAM mount. The better performance of the RAM mount may be because, by its nature, the RAM mount has two additional vibration dampers (the RAM rubber balls) that reduce the vibration transmitted to your phone. So, when compared against each other, the RAM mount seems to …

2004年4月1日 · I use a small ram u-mount around the roadbook bar and then the assembly is identical to the 1150GSA. In fact I used to swap the assembly back-and-forth but that was a little too tedious for this princess. On my /5 (seen in avatar) I have a mirror mount with an assortment of spacers/extenders to locate the phone appropriately.

2019年11月10日 · RAM Quick-Grip XL. And, that’s where the little things like the RAM Quick-Grip XL phone mount come into play. While at AIMExpo this year, RAM was introducing its new RAM Quick-Grip XL phone mount. RAM already had a smaller version of the Quick Grip. But they decided they needed a way to hold larger format phones like a Samsung S10.

2020年6月19日 · They all have at least one ball mount on the bar or dash. it avoids the whole headache of running a Garmin power cable, garmin transformer/breaker, and the Garmin mount to hold and power the unit. Said another way, use this Garmin described Auto method on my bikes, but with different base hardware to hold it.

2014年2月19日 · The RAM ball on the stock mount bolts directly to the plate that snaps into the back of the Zumo for power connections. There have already been reports of that plate failing in posts on this forum. To be fair, the stock mount is probably fine for a street bike. I use mine off road on a KTM350 EXCF and I like to ride single track on rock strewn ...

2013年4月24日 · Thanks for the reply! I've added a code to all three sites (www.gpscity.com www.gpscity.ca and www.expressmounts.com) that grants an instant 15% off of all RAM products.

2008年1月30日 · RAM presented the Quick Grip XL Mount at this years AIMExpo. According to RAM's own Website the Quick Grip XL Mount fits any Phone between 5.75" - 7.25" in height and 2.625" - 3.625" in width. For the regular Quick Grip the Dimensions are 4.75" - 5.75" in height and 2.19" - 3.25" in width.