2013年4月4日 · x-raid2 is the same as raid-5 (or raid-6 if using dual redundancy), but uses netgears proprietary scripts/code to automate rebuild/expansion processes. it is all based …

2013年9月12日 · X-RAID for your Duo (v1) uses the capacity of the smallest disk. All disks must be replaced with higher capacity disks for expansion to take place. However since your NAS …

2021年4月17日 · The OS actually converts the RAID type before it does the sync, as that's how MDADM works when changing the RAID type. It's all automatic and you have to turn XRAID …

2020年12月14日 · The first two drive go in as RAID 1, but the system doesn't give me a choice when I add in the third drive, it will aways go in as RAID 1, but without a redundant drive. …

2016年7月2日 · With this disk configuration XRAID uses RAID-5. Here's a (somewhat simplified) picture of how RAID-5 redundancy works. It's a math trick. Imagine 3 blocks of data - A, B, C. …

2016年5月16日 · On RAIDiator 4.2, to create a RAID6 volume on 4 HDDs: 1) × Welcome to NETGEAR Business Community × NETGEAR will be terminating ReadyCLOUD service by …

2015年10月23日 · OK so it's RAID-6 XRAID as you can imagine it's a bit confusing when you see both phrases on screen and no mention of XRAID2 whatsoever.

2024年3月15日 · Although Seagate never marketed SMR models for NAS, they do use SMR in most of their consumer desktop drives in the 2-6 TB range. Seagate also agreed to disclose …

2015年8月21日 · Lesson learned 2: Backup your NAS even if you have a fault tolerant array. I have purchased a 3TB HDD that I will put in the 4th slot of my NAS104. This single …

2017年7月15日 · The NAS uses a software raid (mdadm) and I think that it can only sync one disk at a time since it needs to calculate parity. It might be possible to sync in two disks to the same …