L293B - Push-Pull Four Channel Drivers - STMicroelectronics
The L293B and L293E are quad push-pull drivers capable of delivering output currents to 1A per channel. Each channel is controlled by a TTL-compatible logic input and each pair of drivers (a full bridge) is equipped with an inhibit input which turns off all four transistors.
High- and low-side drivers are good choices for push/pull solenoids with a return spring. Figure 2-2 shows the LS/HS configuration, with optional external clamp.
The L293B and L293E are quad push-pull drivers capable of delivering output currents to 1A per channel. Each channel is controlled by a TTL-compatible logic input and each pair of drivers (a full bridge) is equipped with an inhibit input which turns off all four transistors. A separate supply in-put is provided for the logic so that it may be run
SN6507 data sheet, product information and support | TI.com
The SN6507 is a high voltage, high frequency push-pull transformer driver providing isolated power in a small solution size. The device comes with the push-pull topology’s benefits of simplicity, low EMI, and flux cancellation to prevent transformer saturation.
MAX22200 Datasheet and Product Info | Analog Devices
The MAX22200 is an octal 36V serial-controlled solenoid driver. Each channel features a low impedance (200mΩ typ) push-pull output stage with sink-and-source driving capability and up to 1A RMS driving current. A serial interface (SPI) that also supports daisy-chain configurations is provided to individually control each channel.
MAX14874 Dual Push-Pull Motor Driver - Analog Devices / …
2017年8月9日 · Analog Devices MAX14874 Dual Push-Pull Motor Driver is designed for driving and controlling relays and valves between 4.5V and 36V. This motor driver features a charge-pump-less design for reduced external components and low supply current. The MAX14874 offers shoot-through protection and internal free-wheeling diodes that absorb inductive ...
MAX14874 Datasheet and Product Info | Analog Devices
The MAX14874 dual push-pull driver provides a small and simple solution for driving and controlling relays and valves with voltages between 4.5V and 36V. The MAX14874 is also designed to drive brushed DC motors. Separate COM pins allow monitoring of individual driver load currents. Peak currents up to 2.5A ensure for PWM controlled large motor ...
The Device is a monolithic integrated high volt-age, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoides, DC and stepping motors) and switching power tran-sistors. To simplify use as two bridges each pair of chan-nels is equipped with an enable input.
Understanding Encoder Output Signals | DigiKey
2019年8月21日 · The three types most commonly found are open-collector, push-pull, and differential line driver. This article explains each type to help engineers choose a suitable device based on the needs of their application.
The SN6507 is a high voltage, high frequency push-pull transformer driver providing isolated power in a small solution size. The device comes with the push-pull topology’s benefits of simplicity, low EMI, and flux cancellation to prevent transformer saturation.
- 某些结果已被删除
跳至内容