Oct 25, 2024 · This guide will show you how to set up the Raspberry Pi and make it work with the RAK LPWAN HATs. The setup of the Raspberry Pi consists of three parts: You have two options in configuring the Raspberry Pi: Flashing the latest Raspberry Pi OS is required for both the headless and the general setup. To flash the OS, you will need:

Build your own LoRaWAN® gateway with the RAK Raspberry Pi 4 Basic Kit. This developer kit includes everything you need: a Raspberry Pi 4 (4GB), pre-loaded SD card, case, power supply, RAK2287 concentrator module, PiHAT, LoRa® antenna, and pre-mounted heat sinks.

RAK2287/RAK5146 Pi HAT is a converter board that makes it possible to connect the RAK2287 LPWAN Concentrator Module or RAK5146 LPWAN Concentrator Module to Raspberry Pi.

RAK7248 is a SX1302 Raspberry Pi 4 LoRaWAN Gateway that consists of Raspberry Pi4, RAK2287 Concentrator, and RAK2287 Pi HAT. The RAK2287 also includes a GPS module.

Jun 20, 2019 · The RAK 831 is a LorA Radio frontend; i.e. it acts as a receiver of incoming lora data packets and forwards them to a aggregator management software/hardware host. It can also transmit LoRA data packets based on the host boards request. In our case a raspberry pi 3 is the host board controlling the RAK 831 frontend. Choosing the backhaul

本文档提供了几种连接网关和登录网关的方法，您可以根据实际情况进行选择。 在为树莓派 3B+/4供电之前，请先安装LoRa和GPS天线。 否则可能会损坏电路板。 当网关启动后，网关默认在Wi-Fi AP（Wireless Access Point，无线接入点）模式下工作。 您可以在PC的Wi-Fi网络列表中查找名称为”Rakwireless_XXXX“的SSID（Service Set Identifier，服务集标识）并连接。 “XXXX”是已安装RAK2245 Pi HAT的树莓派的WiFi MAC地址最后2个字节。 使用下面提供的 …

Tool used to create Raspberry Pi OS images, and custom images based on Raspberry Pi OS, which was in turn derived from the Raspbian project. Note: Raspberry Pi OS 32 bit images are …