2011年5月5日 · First, we must understand why doing a CCV mod is a good choice. Oil vapors in the crankcase need to be vented, or else pressure will build up inside and eventually that will lead to a blown seal, making the engine an oil fountain. As of this writing, I was quoted for an engine removal and installation at $2150 at my Ford Truck dealership.

2017年4月10日 · I'm going to add the ProVent 200. Seems like the cleanest way to do the CCV venting.

2012年1月22日 · Do yourself a favor and replace the o-rings on the CCV housing while you are doing the swap. I also turned my CCV housing to make it easier to route the hose. The housing is the same both ways. Here is some pictures.

2011年3月24日 · Quick question...I see it in a bunch of peoples sigs...what's the CCV mod? Valair Clutch, only the best. Basically taking the ccv that routes into the intake and either routing it so it dumps on the ground or into a catch can. Keeps oil out of the intake. Oh ok I see.

2025年4月3日 · With the factory CCV installation, oily vent gases are directed into the air intake, about halfway between the air cleaner and the turbo. The black air intake fitting directly above the driver's side valve cover has a short hose that connects it to the engine's CCV port and is connected with crimp-style clamps which must be pryed open with a ...

2011年3月19日 · Who is running the Stealth's / NC Hornet's CCV Kit? What is all the secrecy about? Is the kit worth the $100? I know the CCV mod can be done cheaper, etc, just wondering about this particular kit. With "over 500 sold" someone should have a review.

2024年2月5日 · After changing boots on my 7.3 power stroke, I realize there has to be a better way to control oil entering the intake system via the CCV. I was thinking about adding a quality catch can to my list of projects this summer.

2007年11月30日 · First, there is a orange hose update kit (F7TZ-9C681-AA) since the orange hose for the turbo inlet is no longer serviced by Ford or International. This kit has everything to switch to the black hose used in the early 99 SDs. Hose, clamps and replacement intake breather adaptor and hardware.

2016年4月20日 · And Certainly,,, a closed-loop CCV (by returning those vapors back into the intake) will eliminate those odors. The stock CCV system really isn't a bad concept, it's just it's designed so poorly it lets all that oil carry with it.

2008年3月20日 · BRV+, CCV mod run to the back between fuel tank and skid plate. 2.5" leveling kit and running 315/75/16 Hankook MT. Cobra CB with dual 3' whips. 12000 miles + on WMO and ZERO problems. Huge make over on the way.