2016年7月15日 · This is a weird one: My '69 has always had a cold starting problem because there's no gas in the carburetor after it has been sitting for a day or two. It fires right up once it …

2009年12月31日 · Here's my dilemma: 66' coupe, Big block with new gas tank, gas line, new Holley 11ogpm mechanical fuel pump, fuel filter to 750 Holley double pumper. After the car sits …

2024年3月5日 · Press the gas pedal 1/2 way to the floor about 3 times. Take your foot of the gas pedal and wait about 10-15 seconds. While leaving your foot off the gas pedal, try and start …

2016年2月18日 · and pump the gas a dozen times while cranking her over before the engine will even cough to start since there was no gas in the bowls . Over a span of a year, from Summer …

2007年6月14日 · There is no fuel puddling by the intake manifold. I have no way of checking the fuel pressure. The float height appears to be fine. I also could not see any bubbling going on in …

2011年2月14日 · I don't think the "vented gas cap" is really vented: I think a "vented gas cap" is designed and ment to be used only on a "vented gas tank." Gas caps have not been vented …

2007年4月3日 · After that, the engine would not start unless I poured gas into the carb. Once I poured gas in the carb, it ran great. I let it heat up to 195 degrees and I took it out for a healthy …

2004年5月3日 · I have a 70 chevelle with a regular gas tank with a mech, pump and no vent. I have tried multiple vented gas gaps, drilling small holes (bad idea), and lots of other stuff. …

2017年8月15日 · these burp gas when nearing full and the nozzle cuts of flow. it is the neck placement angle , have to live with it. i don't the think the vent is the problem, if you fill slowly. …

2011年4月26日 · Obviously not driveable in that state, but proved to myself that the idle circuit was not affted by changes in jet/rod, PV springs. Did the same thing on a Holley 3310 780 on …