2020年1月15日 · I thought I'd start a thread for Leaf owners to refer to that shows available and most useful mods and additions to the Leaf. To kick off, here are mine in order of importance (in my mind). 1) Strut covers. I purchased these from ebay here:

2015年3月31日 · Got a 2012 SV Loving it. of course have to mod/upgrade/add to it to make it my own I will post all my little mods and changes in this one thread to keep it simple for me.

2021年9月4日 · The basic idea is to retrofit a 110kW 2018+ inverter into the older AZE0 LEAF. Sorry ZE0 owners, this mod is not for you! A CAN-bridge is needed to solve the fault codes and NM-demand messages, more explained in the videos. Here's a three-part video series: https://youtu.be/Of2vCYgblY4 https://youtu.be/VGBA8VPWwIg https://youtu.be/SidQ0vyxeos

2017年2月19日 · I have finished a new software mod for Nissan Leaf Gen1 (24, 30kWh). It delivers One Pedal Drive in mode D, astonishing 40+kW regen till full stop, 90kW (122 hp) power and 300 Nm (+30Nm more torque). Feel like owning a new Nissan Leaf Gen2, with improved regen even in cold winter, till the full stop.

2023年6月8日 · Env200 2018 is using similar 4G tcu with older ze0 2016 - 2017 technology but there is new engine control module with VCM different to LEAF. This module contains can gateway from "electric can bus" to "vehicle can bus" and implements changes for new TCU.

2015年9月9日 · Here are a few DIY’s that any EV-Gearhead can accomplish. The Nissan Leaf is already a slippery vehicle with a drag coefficient of 0.32, but adding modified front and rear cowlings and side-skirts; reducing the size of the radiator opening; or adding solid wheel disk covers can sharpen the way the small electric car slices through air.

2021年12月7日 · What’s the first mod you made to your challenger? What do you recommend new owners to mod?

2024年1月6日 · My mod is in the progress. So for inspiration ... Its easy to remove plexiglass (polycarbonate) because its screwed + isolation ballast. You need some time to remove it but possible without additional heat. No thermoglue is there. Wirring: Its another black 10pin connector instead of 6pin in halogen version. I made direct reduction cable.

2021年7月25日 · Thanks to the platform that the Leaf shares with several other Nissan vehicles, it’s easy to enhance aerodynamics, braking, suspension, and lighting. Here are a few DIYs that any EV-Gearhead can accomplish.

2019年3月3日 · I have a Gen1 Nissan Leaf 30Kw and I want to increase the available power. I was inspired by Arlin Sansome's videos on Youtube: https://youtu.be/S6OInkLWAhk I like the idea of potentially creating a bolt-on kit that anyone can purchase and install (at their own risk ofc). Initially though, I just want my Leaf to have a bit more poke.