2011年3月22日 · The seal was there for the pumps that needed to be somewhat siliconed around the fittings that went thru the hull. This is where the neo seal came into play, to seal pump to …

2021年3月28日 · I ordered a neoprene seal for a 2000 GTX 155mm jet pump Part No. 293000051. I received other types of seals that look like they would work but I opted to install …

2009年7月6日 · Last year my Seadoo (95 GTX) suffered from lag out of the hole due to a missing Neoprene seal between the pump and ride shoe. I purchased and installed the seal and it was …

2020年10月2日 · I took my pump out and replaced both the wear ring and impeller, because both were bad in my 1996 GTX. I used the delrin wear ring from osd marine here: OSD Sea Doo …

2013年4月16日 · yeah, you're correct the seal from sbt is more like a cheap foam than neoprene. it was slightly smaller on the outside diameter, the adhesive side was sticky enough that i …

2016年3月26日 · The microfiche parts list does not show a neoprene seal between the two. I did pick up 2 neoprene seals but my concern is if they will compress enough for the water pick up …

2012年3月20日 · I'm rebuilding the pump on my 92GTS, and was wondering if I need a neoprene ring for it. I did not see it in my seadoo manual, nor did I pull one off when I pulled the pump …

2009年2月26日 · I have installed a new neoprene seal. I know I need sealant around the bailer fittings and the water line fitting that goes into the hull. Do I need to put sealant around the …

2-93200087 NEOPRENE SEAL 13.99 27.98 ... The jet pump grease seal is a 100 hr maintenance replacement item).

2020年6月14日 · The wear ring and impeller tool are the big items, but you’ll also need a new neoprene seal between the pump and the hull, a new o-ring for the pump cone, and new oil for …