2017年11月10日 · In fact, i have installed V4, got the problem, went back to V3.4.96 but the problem is still there. It is possible to untick the "Enable Stream Encryption Option" on the screen connected to the NVR, but it is automatically reset on. As mentioned by Phil above, when going back to V3.4.96, all nvr options were lost and need to be reintroduced.

2024年10月22日 · Luckily, there's a little-known feature on the local GUIs of each NVR which allows you to view all of the connected cameras. The below steps and videos will walk you through how to use this feature on the NVR 4 E-UI, NVR 4.0, and NVR 5.0 interfaces, which are the most commonly found on Hikvision NVRs now.

2024年12月15日 · On the older I2 (with NVR 4.0) I used to view the live view with VCA info turned on (i.e. seeing the green/red boxes where any movements were happening). And that worked fine for the 6 cameras I had it set up on. But now on the newer M2 when I try to enable "Show VCA info" in live view it only works for 4 cameras.

2019年9月19日 · Step 4: Select the files you want to export/backup (click each thumbnail and it will go blue with a tick in the corner) or if you want everything just click Select All in the top right of the screen Step 5: Plug your external storage device (USB stick, external HDD, etc...) into the available USB port on the NVR.

2018年10月10日 · Firstly, your device will need to be running recent / the latest available firmware. We have only yesterday seen the first reference to this feature in the brief notes to the latest firmware for the -I Series NVRs: Latest HikVision Firmware for -I NVRs - new V4.1.65 (76XX, 77XX, 96XX NI-I) e.g...

2021年6月21日 · Hi Guys My HIKVISION 4.0 NVR is connected to my router but is still showing offline status. I can access the NVR via my PC on the same network and have tried a few different set ups but not having any luck. Any advice would be greatly appreciated. Thanks Steve

2022年4月1日 · Hello--The HK nvr i bought seems to be a fine machine--been trying to configure my second monitor--the manual does not cover it--i have had to stumble along without knowing the correct procedure--hk does not seem to have a specific sheet to cover this--can you point me to getting a manual supplement or other instruction to cover the second hdmi ...

2018年11月18日 · So there was an upgrade from 3.4.x to 3.4.x and then from 3.4.x to 4.x anyway did that in the correct way anyway now that I have gone to 4.x there is no username to select from in the drop down when I go to login, and the secure pattern doesn't work I am able to reset the password but because there is no username in the drop down list I am ...

2021年5月13日 · Upgrading from v3.4.92 build 170518 or Older All recorders must reach v3.4.92 before proceeding further. Upgrading from versions before v3.4.92 directly to any version of v4.X will likely cause the recorder to fail. If the recorder is already at v3.4.92, a full factory default is highly recommended before upgrading to any version of v4.X.

2019年3月1日 · The difference with the I-series NVRs is that they use the latest 4.0 GUI, and on the live view page of this new interface you will find an icon in the bottom right of the screen labelled 'AUX Monitor' (see image below), clicking this icon allows for you to switch control between the HDMI & VGA screens and allows you to move through the NVR ...