Compact, high-amp fuse—appropriate for DC Main, inverter, windlass, and bow thruster circuit protection; Provides high current protection in tight space constraints; Ignition protected when used with Blue Sea Systems' MRBF Terminal Fuse; Isolated stud design uses standard M8 hardware and permits stacking of terminals

Space-saving ignition protected fuse for 30 to 300 Amp loads. Must use with Terminal Fuse Block.

2018年12月14日 · Compact, high-amp fuse appropriate for DC Main, inverters, windlass, and bow thruster circuit protection. Provides high current protection in tight space constraints. Ignition protected when used with MRBF Terminal Fuse Blocks. Isolated stud design uses standard M8 hardware and permits stacking of terminals.

2007年12月19日 · This compact fuse, approximately 1" by 1" by 1/2", mounted in the Terminal Fuse Block, can be installed on 3/8" (M10) terminals on batteries, battery switches, or busbars. While MRBF Terminal Fuses provide practical, easy and economical circuit protection, care must be taken when installing and using them. * ABYC E-11.12.1.1.1.

2009年11月17日 · Marine-grade, ignition-protected fuse blocks accommodate high amperage MRBF fuses. Suitable for protecting DC main, inverter, windlass, and bow thruster circuits. Mounts on a 3/8" battery post, battery switch or busbar, allowing for easy installation in tight space constraints and satisfies ABYC 7" circuit protection rule.

Eaton's Bussmann Series MRBF-300 Marine Rated Battery Fuse, rated at 300A for 58VDC systems with bolt-down design are available at Waytek today.

The Blue Sea Systems MRBF Terminal Fuses are designed for use with all Blue Sea Systems Terminal Fuse Blocks. Requires the use of Terminal Fuse Blocks, do not mount the fuse directly to the battery terminal.

Designed for the most demanding environment to provide high current protection for the tightest space constraints. Suitable for main and auxiliary circuit protection such as alternator outputs, starter motor inputs and accessory circuits.

Terminal Fuse Blocks mount on 3/8" (M10) battery post, battery switch and busbar terminals. Appropriate for DC Main, inverter, windlass, and bow thruster circuit protection, providing high current protection in tight spaces.