2010年7月3日 · M64 UF levers have a small bottom small tab, levers from slabside rifles have a medium tab, while M70 have a large bottom tab. This difference is because of the different …

2008年8月9日 · m64 threaded barrel, "bulge on the left side to accomidate the BHO lever. A "hat" bolt lower left front of mag well, shelf down left side of recevier just below the dust cover (think …

2014年3月2日 · USA ORF receiver build- if a M64 kit was used these have pretty authentic markings and are very nice if built well (these will have later press & pin vs screwed-in barrel) …

2024年5月16日 · Pinholes appear out of nowhere and the metal sometimes just defies flowing where you want it to go. I have done a few now and have yet to be able to get the welded area …

2024年11月25日 · Here's a really good write up on the M64/M70. " Some time in the early 50s Yugoslavia acquired few AK-47 rifles and via reverse engineering started development of its …

2021年7月25日 · New to forum, so thanks for all future help! I'll need it. Did a few Saiga shotgun conversions way back, so somewhat familiar the AK basics. Decided to get a kit, and the only …

2010年4月19日 · I bought one of the earlier Yugo M64's from Apex a couple of years ago. I wanted to go the reweld route, but the muzzle swallowed the bullet, and I had a problem …

2008年7月7日 · It is not home made grips. I've been told that it is prototype bayonet for prototype yugo AK - m64. These bayonets produced in limited number,have no marks or serial numbers. …

2023年2月20日 · The original Yugo M70A (M64) had a mechanism the actually held the bolt and carrier open when empty. There was a notch in the mag to engage the lever. They want away …

2006年8月8日 · The name M64 was applied to many prototype Yugo AK's. Some had longer barrels, different sights and different muzzle brakes and devices. Zastava refers to the final …