The Integrated Truss Structure (ITS) of the International Space Station (ISS) consists of a linear arranged sequence of connected trusses on which various unpressurized components are mounted such as logistics carriers, radiators, solar arrays, and other equipment. It supplies the ISS with a bus architecture.

2023年1月14日 · ITS-S5 and ITS-P5 (Integrated Truss Structure) are elements of the International Space Stations main truss structure. The Integrated Truss Structure of the ISS consists of a linearly arranged sequence of connected trusses which is used to mount various unpressurized components, such as ELC logistics carriers , radiators, solar arrays, and other ...

2022年11月26日 · The new P5 (Port) truss spacer, which will provide an attachment point for the P6 truss, is pictured from space shuttle Discovery after it undocked from the International Space Station on Dec. 19, 2006. The P6 is seen with one of its solar arrays retracted before it would be removed and installed on the P5.

2023年9月27日 · The Integrated Truss Structure (ITS) is made up of 11 segments plus a separate component called Z1 that are attachment points for the solar arrays, thermal control radiators and external payloads on the space station. The solar arrays …

2017年6月19日 · The P5 and S5 trusses are connectors which support the P6 and S6 trusses, respectively. The P3/P4 and S3/S4 truss assemblies’ length was limited by the cargo bay capacity of the Space Shuttle, so these small connectors are needed to extend the truss. The P5 truss was installed on December 12, 2006 during the first EVA of mission STS-116.

The P5 Truss is structurally attached to two other integrated trusses of the ISS on either side; the P3/P4 and the P6 truss segments. The purpose of the P5 truss is to separate the trusses that contain the solar power modules and arrays. These trusses produce power from large photovoltaic solar cells. The location

2024年12月25日 · RESURS P5, 62430 is a Commonwealth of Independent States-origin payload satellite in SSO that was launched on Wed, 25 Dec 2024 UTC via a SOYUZ-2-1B launch vehicle from the Tyuratam Missile And Space Complex (TTMTR).

In the most demanding ISS assembly mission ever, the crew would require an additional spacewalk to complete installation of the P5 truss, retraction of the recalcitrant port P6 solar array wing, and activation of the truss electrical and cooling system.

The main goals of the mission were delivery and attachment of the International Space Station's P5 truss segment, a major rewiring of the station's power system, and exchange of ISS Expedition 14 personnel. The shuttle landed at 17:32 EST on December 22, 2006, at Kennedy Space Center 98 minutes off schedule due to unfavorable weather conditions.

2020年3月27日 · P5 is used primarily to connect power and cooling lines and serve as a spacer between the P4 photovoltaic module (PVM), or solar battery, and P6 PVM, which will be joined during a later assembly mission. P5 is very similar in …