2021年7月15日 · It's the "gateway" or "nexthop" address from the current default route (i.e. the 0.0.0.0/0 route). In IP routing, a route's gateway/nexthop has to be a device on the same physical subnet, so the actual router needs to have an IP address that is within your own IP subnet.

2015年5月9日 · LAN IP: 192.168.1.1 -like an internal address only for your network, say at home or work). You can have different devices on your LAN that have addresses like 192.168.1.5 or 192.168.1.13; WAN IP: 216.119.143.xx -an address the world sees for you when you browse the web. Gateway IP is the WAN address dedicated to the modem (like 216.119.143.50).

2018年5月10日 · The default gateway for an IPv6 will show up as a link-local address (fe80::) used for router advertisements and IPv6 auto configuration. It is a valid address but its not routable. Meaning only your link can get to it.

2010年2月15日 · Each router has three values Address, Mask and Gateway. Whenever an IP packet arrives at a router, its IP address is masked (using bit-wise AND) with a Router Mask and compared to a Router Address. If the the Masked IP address is same as Router Address it is sent to a corresponding gateway.

2009年11月30日 · A default gateway is the interface address of a router and a router's job is to intercommunicate different IP networks. The default gateway works as a gateway for IP address of a network to communicate with the IP address of another IP network. What is DNS? DNS resolves domain name such as Google.com into IP address such as 202.22.22.22.

2021年10月3日 · Figure out the gateway's IP address. It can be done by pinging to 10.10.2.x (x = 1,2,3,4,250,251,252,253,254, try one number per time). Your real gateway should response the ping command. If you cannot found any real gateway, may …

2010年1月1日 · # arping -c 1 -S [source_ip] -T [target_remote_ip] [gateway_mac_address] Where: source_ip is an IP that's locally assigned on your host; target_remote_ip is the IP address you want to ping; gateway_mac_address is the layer 2 ether address of the alternate gateway you want to use; Alternatively if you're using some form of Solaris you can use:

2016年10月27日 · Let's take an example of a wireless home router, it assigns hosts IP addresses, DNS server address and the gateway. Let's say WLAN network is 192.168.1.0/24. By default the gateway is always 192.168.1.1, so the devices connected to that network get the gateway IP which is always in the subnet and IP address plus a mask which identifies the ...

2016年9月17日 · First: In most home setups the public IP address is handed out by your ISP. It is not configured from your computer. Secondlyt, your local IP address, network mask, default gateway etc can be configured on your computer. Usually we call this a static IP. It is rare to see that ion home computers though.

2013年8月20日 · If IP address of Network card are configured to obtain automatically, Change it to fill the IP address manually. For example if the router IP is 192.168.1.1, Fill the IP address of PC's LAN as 192.168.1.x and similarly if the router IP is 192.168.0.1, fill-in the IP as 192.168.0.x.Now fill the default gateway as 192.168.1.1 or 192.168.0.1.