2011年11月6日 · Re: IMR 4895 Loads for .308 At a hundred yards, the 41.5 gr. IMR 4895 load with a 168 SMK in the MWS is a lot more accurate than I am. (brass or primers don't seem to make any difference) Shooting 300+ you might need a hotter load though. There's a thread of go-to .308 loads going on now. Has a lot of good ideas.

2020年2月7日 · I am curious if anyone has tested the difference between the two H & IMR 4895's and what they have found for real world differences in the two. (velocity, temp stability, kernel size, fouling etc) I specifically may try to see what I see in straight 6BR with heavies and possibly a 223 with heavies but I'm curious to hear from others.. Brien

2020年11月18日 · Hello, I am brand new to this forum. I have been reloading .308 and 30-06 using IMR 4895 powder with good results for many years. I did a search on the forums here to find out about using IMR 4895 for 6.5 CM. I want to load up a few rounds for my brand new 6.5 Creedmoor Savage 110 Ridge Warrior...

2021年1月5日 · IMR 4895 is noticeably faster than H4895, and the kernels range from extremely short little fragments to much longer/larger sticks, whereas H4895 kernels are fairly small and uniform in size.

2011年3月17日 · Just got back from the range. I had loaded up a handful of .45 70's over the weekend, using the 350 grain Lee bullet and 44.2 grains of IMR 4895, and wanted to try them out. This load is a published starting trapdoor load but using a …

2009年10月13日 · Re: Varget vs. IMR 4895 vs. RE-15 I hear ya Sobr. Actually when I started out, IMR4895 was the first powder I tried. I used a 168gr Amax with 40.5gr 4895 (I know, I started way low) and put 3 rounds in one ragged hole at 100 yards.

2012年1月18日 · Cruising the forum, I see many threads about accuracy loads with IMR 4895 and various SMK bullets (168, 175, etc). I'm looking for accuracy loads with IMR 4895 and 147 gr M80 ball pulled bullets in once-fired LC brass. I know this is an oxymoron, but the longest range in my county is 100 yards, and I need some practice ammo.

2010年2月2日 · Never tried H4895, but IMR 4895 is the shizzle. Really though I've had some pretty positive results with 40.5g IMR4895 (yeah it's low but it was a sweet spot) and 168 A-max's. J

2015年6月5日 · The Hornady loading manual lists a max load of 53.2gr behind their 500gr "J" bullet and a velocity of 1700fps. RUGER #1 data. This was the only IMR info I could find that addressed heavier bullets. I have two e-mails in to Hodgdon to ask about load data and what are the facts about the current "H" and "IMR" 4895 being the same powder. NO ANSWERS!

2011年6月11日 · They claim a 165 fps (or so) change in velocity from 0-125 degrees for IMR-4895. IMR 4064 shows about 50 ...