The HUS, JUS, and MUS hanger series offers double shear nailing. MiTek’s dimple allows for 30° to 45° nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails, and faster installation. Use all specified fasteners.

Designed for medium load conditions. Extended 3" deep seat provides enhanced truss bearing. Use all specified fasteners. Joist nails must be driven at a 30° to 45° angle through the joist or truss into the header to achieve listed loads. Slant/double shear nails must be used to achieve listed load values. Need Help or Have a Question?

The MITEK HUS series face mount hangers are designed for medium load conditions. They feature a 3 in. D seat to provide enhanced truss bearing. The raised dimple allows for 30° to 40° nailing. MITEK connectors are designed for code compliance, easy installation with commonly-available fasteners and high performance.

The MUS / HUS hanger series offers double shear nailing. MiTek’s raised dimple allows for 30° to 45° nailing through the joist into header, resulting in higher loads and less nailing. Materials: MUS – 18 gauge; HUS – 16 gauge

This hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all common nails for the same connection.

The HUS179 Slant Nail Face Mount Hanger offers double shear nailing. The raised dimple allows for 30 to 45 degree nailing through the joist into the header, resulting in higher loads and less nailing. It is constructed of 16-gauge steel with a G90 galvanizing finish. Click here to see more products from MiTek.

HUS-series hangers are tested, load rated and code compliant; Seat width: 1-13/16-in; Actual joist size: 1-3/4-in x 11-1/4-in to 11-7/8-in; Made from 16-Gauge steel; Galvanized (G90) for extra corrosion resistance; Install with 0.162 in. x 3-1/2 in. nails ; …

Slant nail joist hanger intended for medium load conditions that offers double shear nailing. Made of 16 gauge steel with G90 galvanized finish for improved corrosion resistance. Not for use with treated lumber. Extended 3-inch deep seat provides extra truss bearing. Installation requires 30 16d nails for header and 10 16d nails for joist (not ...

Manufactured from G90 galvanized steel, these hangers offer enhanced corrosion resistance, making them ideal for both interior and exterior applications where additional durability is required. Their robust face-mount design ensures superior load distribution, reducing the risk of splitting or failure at critical connection points.

MiTek HUS179 Slant Joist Hanger, 9-1/8 in H, 1-1/2 in D, 1-13/16 in W, 2 in x 10 to 12 in, Steel, G90 Galvanized available at Hep Sales & North Main Lumber