2008年6月1日 · So the latest rifle project I have officially kicked off is an HK/CETME/PTR rifle. My end goal for this build is to end up with an HK-G3 rifle, using a combination of CETME, PTR, and HK parts. I am also building off an Ohio Rapid Fire 80% flat. The first step was to …

2009年1月21日 · On this build (G3) I did it with the trunnion out and for the CETME I did it with the trunnion welded in place. I tried it with just the trunnion on the CETME but taking the bolt gap without the receiver was a bit hard, so I opted to weld in the trunnion then press the barrel in.

2002年9月13日 · JLD makes the PTR 91, which is an HK-91 clone. They typically tend to start around 900, and can be up above 1500. HK 91s can be 2000 and up. CETMEs can be found in the 4-500s and go up from there. Your bud's description sounds like a Century-built CETME. Century is notorious for making and selling poorly-built rifles.

2008年5月31日 · :D First start by using an awesome jig made by another member on another forum far far away. Complete with dummy bolt carrier Start by placing your flat into the jig and centering it using the centering bolts. Next, put the rod piece in. This is a …

2010年12月14日 · Home-Building a CETME/HK-G3/PTR Rifle. Jump to Latest 141 - 160 of 195 Posts. 1 8 of 10 Go to page. Go ...

2002年9月13日 · Snapped a pic for comprison of the HK trigger parts vs. the CETME trigger parts. They are similar, but not exact. The trigger and sear at the bottom of the pic are US-made stamped JLD, and are direct replacements for the HK parts. I do not know if they will work in a CETME trigger box.

2009年1月5日 · -1 HK G3 buttstock so you can do the buttstock conversion if you wish.-Paddle mag release NOT INCLUDED This kit includes the following US made parts as listed above.-1 receiver-1 pistol grip-1 cocking handle-1 trigger housing-1 muzzle brake

2003年2月11日 · I know there are differences between the Cetme and G3, but my G3 bolt head is 1.834" total closed length is 4.519". Hopefully someone will come up with Cetme numbers. If it has been ground on, Apex has complete bolt and carrier assemblies for $65.

2013年10月10日 · HK 93 magazine, HK 93, 33 mag, C93 magazine - HKPARTS.NET ... I thought G3 tubes wouldn't work with the ...

2007年10月29日 · I have 2 parts kits. I want to do 1 CETME and one HK. I am just having a hard time finding the US made parts that I want and I will be leaving for Afghanistan in 2 months so I don't have time to put them together. CETME parts kits are cheaper but a lot more work. I found a HK kit for $300 and it will be an easier build.