TCP/8001 (by default; this port can be customized) While a proxy is configured, FortiGate uses the following URLs to access the FortiGuard Distribution Network (FDN): update.fortiguard.net

2019年10月2日 · This document contains a series of diagrams and tables showing the open ports used for communication between various products including FortiGate, FortiAnalyzer, FortiAP-S, FortiAuthenticator, FortiClient, FortiCloud, FortiDB, FortiGuard, FortiMail, FortiManager, FortiPortal, FortiSandbox, and 3rd-party servers using FSSO.

For the list of required services and ports for EMS, see the FortiClient EMS Administration Guide. You must enable required ports and services for use by FortiClient and its associated applications on your server. The required ports and services enable FortiClient to communicate with servers running associated applications.

2022年6月16日 · Open the Device Manager and under 'Ports' see a COM port associated with the adapter. Make note of the COM port number. If there is no Ports section listed, ensure the proper drivers are installed for the adapter to function. Connect the serial adapter to the rollover cable. Connect the RJ-45 end of the rollover to the FortiGate’s 'Console' port.

2007年5月8日 · To forward TCP or UDP ports received by the FortiGate external interface to an internal server, follow two steps: Create a Virtual IP and enable Port Forwarding. Create a firewall policy and add the Virtual IP. This example describes how to configure port forwarding to allow RDP access to an internal server on port 3389.

2024年11月5日 · This article describes that Port A and Port B seen in model FortiGate 60F/61F, 70F/71F, 80F/81F, and 90G/91G can be used as regular traffic ports. Scope: Entry-level FortiGate. Solution: In earlier FortiGate models, there could be dedicated ports for DMZ or even HA (FortiGate 80E/81E).

Official FortiOS 5.6.3 release. Since FortiOS 5.6.3, the default port used for the FortiGuard services is 8888. New section added: Automatic update at every GUI login on page 68. Added FortiPortal ports and protocols diagram and table. FortiPortal: FortiGate, FortiAnalyzer, and FortiManager. Released for FortiOS version 5.6.3.

Added FortiMail ports and protocols diagram and table. Updated other diagrams and tables to show their communication with FortiMail: FortiAnalyzer, FortiGuard, and FortiManager. Added FortiClient EMS required services information. Added missing protocol, port, and FQDNs to FortiSandbox Community Cloud reference and updated diagram.

The following tables describe the port numbers that FortiAnalyzer uses: Traffic varies by enabled options and configured ports. Only default ports are listed. If a secure connection is configured between FortiGate and FortiAnalyzer, syslog traffic is sent into an IPsec tunnel. Data is exchanged over UDP 500/4500, Protocol IP/50.

You want to allow incoming connections from the Internet to a PC on the internal network so that the PC can access an Internet service that requires open ports. The service requires opening TCP ports in the range 7882 to 7999, as well as opening UDP ports 2119 and 2995.