Fluke 87V displaying "Lead" and sounding beeper when nothing
2012年7月15日 · Re: Fluke 87V displaying "Lead" and sounding beeper when nothing is plugged in « Reply #5 on: July 15, 2012, 02:17:23 am » The 28-II may be optical because it's easier to seal, but many other meters (which I believe includes the 87V) measure resistance between two halves of the banana jack.
Fluke 87V LEAD alert - Page 1 - EEVblog
2014年5月31日 · yes it is a intermittent fault when the leads are in the correct sockets for the measurement selection and i rarely take mA or A measurement through my leads in those sockets. I use a i200s for current. It has only ever happened to me when the leads are plugged into the com and v sockets and seems to starts as soon as the meter is turned on.
Repair Fluke silicone test leads. - Page 1 - EEVblog
2023年12月1日 · Because as best I can tell, Fluke doesn’t make any 3m multimeter leads, just 1.5m. (They sell the TL221 straight leads that come with couplers to extend existing leads.) However, there is the TL1550B test lead set intended for their megohm meters.
Absolute Best MultiMeter Test Leads - Very Low Resistance
2024年1月5日 · Especially as replacements to the now-crappy TL75 leads that Fluke ships now. The Brymen leads are excellent, and an outstanding value at ~$10 a set. I also have several sets of cheap Chinese leads that cost <$5 that are surprisingly good.
Fluke 189 multimeter repair advice needed - Page 1 - EEVblog
2022年3月5日 · Re: Fluke 189 multimeter repair advice needed « Reply #23 on: March 30, 2022, 01:42:19 am » very good. :-+Prevents water or liquids from entering the 4 sockets for future use.I've even found that both sunny and rainy days can affect the data
Absolute Best MultiMeter Test Leads - Very Low Resistance?
2024年1月2日 · The fluke TL175 test leads I normally use for everyday testing always seem to have 0.5 ohm resistance reading. I’ve tired cleaning the test leads and meter connection ports but it makes little difference. I have even tested a set of brand new fluke TL175 lead and the have about the same resistance. I tested them both on a Fluke 87v and 289.
Fluke 189 has beep with LEADS displayed - Page 1 - EEVblog
2014年8月2日 · Re: Fluke 189 has beep with LEADS displayed « Reply #2 on: August 03, 2014, 03:03:57 pm » Had this on an 87, dried it with a heat gun but plan to strip and clean it properly someday.
Fluke multimeter calibration - Page 1 - EEVblog
2018年7月26日 · Looking into possibly purchasing a Fluke 8840a. The guy is selling it “as is.” It does power up but without any leads connected, it shows a voltage of about 2.5v. Are these easily calibrated by the user or does it need to be sent in to Fluke? I am hoping this is the only issue but I really have no way of knowing.
FLUKE 289, shows message "warning leads connected incorrectly …
2019年3月30日 · I have a FLUKE 289, shows message "warning leads connected incorrectly", I have detected that it is by the device O27, please I will appreciate if you can indicate which is the device code to replace it. Thank you
Test Leads on Multimeters, proper way to store them? - Page 1
2019年6月20日 · Wrapping the test leads around the meter and tossing it into a gang box (or shoving it into a tool pouch) is a sure way to degrade the integrity of those leads. If someone borrows your meter and returns it with the leads wrapped around it, …