2019年6月5日 · Just to confirm you are looking for the Engine Coolant Temperature sensor (ECT). For the 4.6 SOHC motor the ECT sensor is located on the front of the intake manifold …

2011年6月19日 · The gage temp sensor has 1 wire and is located on the driver's side up towards the front of the lower instake manifold. The ACT sensor is similar to the ECT and fits in the #5 …

2017年7月25日 · I am also getting code P0118 for coolant temperature sensor. From what I have read, this motor (Romeo 4.6l) should have 1 coolant sensor on the intake manifold. Take a …

2014年1月30日 · The 2002 model year V6 does NOT have a coolant temperature sensor (ECT). Instead it has a cylinder head temperature sensor (CHT). The CHT is located on the cylinder …

2011年5月6日 · It is called a cylinder head temp sensor, and it is located on the back of the driver's side head.....

Disconnect the exhaust gas recirculation (EGR) tube from the EGR valve.

the intake air temp sensor is in the air cleaner outlet tube between the air cleaner and engine. See details below: https://peapull.com/o/1594157084.pdf. The EGR is on the back of the motor see …

On this vehicle, the job of the Engine Coolant Temp Sensor is done by the Cylinder Head Temp Sensor. It's mounted to the front, top, driver's side of the engine. It has a 2-wire connector …

2016年11月3日 · The PCM relies on the EGR temperature sensors to monitor the cooler’s operation. Generally, one temperature sensor is located on the exhaust manifold, and one is …

2010年6月10日 · Coolant temp for the ECU is in the heater tube passenger side. Sender for the gauge is in the intake near the #5 runner - in front just before the coolant leaves the engine …